Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Inverse Model for Solving Partial Differential Equations Using a Stochastic Method and COMSOL Multiphysics®

E. Khosrowshahli[1], A. Jeremic[1]
[1]McMaster University, Hamilton, ON, Canada

Partial differential equations (PDEs) govern many phenomena in nature. Solving optimization problems which comprises the solution of large number of PDEs, is expensive concerning time and memory. Therefore, to reduce the solution cost, original problem is transformed to a corresponding ... En savoir plus

Numerical Simulation of Electrostatic Charging Droplets in Microfluidic Devices

S. Yao[1], H. Zhou[1]
[1]HKUST, Hong Kong, China

In this paper, the mechanism of charging process was simulated and analyzed. The simulation was conducted using COMSOL Multiphysics® software, based on the laminar two-phase flow level-set interface coupling with the electrostatic interface. Meanwhile, different parameters (such as the ... En savoir plus

Alternate Glucometer Bio-sensor Model based on Ultrasonic MEMS Transceivers

P. Pattnaik[1], S. K. Kamilla [1], Debi Prasad Das[2]
[1]MEMS Design Center, Institute of Technical Education & Research (ITER),Siksha ‘O’ Anushandhan University, Bhubaneswar-751030, Odisha,India
[2]Process Engineering and Instrumentation Cell,Institute of Minerals and Materials Technology (IMMT),Bhubaneswar, Odisha,India

To prevent further complications in diabetes, proper management of blood glucose levels is essential. By using ultrasonic transceivers (both transmit and receive) the glucose level of human blood can be determined. By using this ultrasonic technique miniaturized sensors for non-invasive ... En savoir plus

Reducing Solar Heat Gain from Inclined Buildings’ Roof by Using Radiant Barrier System

S. Ebrahim[1], A. Alshayji[1]
[1]Department of Mechanical Engineering, College of Engineering and Petroleum, Kuwait University, Kuwait City, Kuwait

The study produced a simulated model of natural convection in an inclined rectangular channel open ended with different locations of radiant barrier (RB) along the channel thickness(S). The upper plate is heated by various uniform constant heat fluxes while the inner surface of the lower ... En savoir plus

Simulation of Acoustic Energy Harvesting Using Piezoelectric Plates in a Quarter-Wavelength Straight-Tube Resonator

B. Li[1], J.H. You[1]
[1]Southern Methodist University, Dallas, TX, USA

An acoustic energy harvesting mechanism at low frequency (~200 Hz) using lead zirconate titanate (PZT) piezoelectric cantilever plates placed inside a quarter-wavelength straight-tube resonator has been studied using COMSOL Multiphysics 4.3 and compared with experimental data. When the ... En savoir plus

Keyhole Formation During Spot Laser Welding: Heat and Fluid Flow Modeling in a 2D Axisymmetric Configuration

M. Courtois[1], M. Carin[2], P. LeMasson[2], S. Gaied [1]
[1]ArcelorMittal, Global R&D, Montataire, France
[2]LIMATB Laboratory, Université de Bretagne Sud, Lorient, France

For a better understanding of phenomena associated to the appearance of defects in laser welding, a heat and fluid flow model is developed. This study is focused on the modeling of a static laser shot on a sample of steel. This 2D axialsymmetric configuration is used to study phenomena ... En savoir plus

Image-Based Simulation of Electrical Impedance Techniques Applied on the Human Thorax for Cardio-Pulmonary Applications

F.K. Hermans[1], R.M. Heethaar[1], R.T. Cotton[2], and A. Harkara[2]

[1]VU University Medical Center, Amsterdam, The Netherlands
[2]Simpleware Ltd., Exeter, United Kingdom

For medical diagnostic purposes there is an increasing need for non- (or minimal) invasive techniques to measure all kinds of parameters that can provide insight in the functioning of cells, organs or organ systems. Currently, Impedance Cardiography (ICG) is used for measurements of the ... En savoir plus

Three Dimensional Modeling of PEM Fuel Cells with Current Collection from the Gas Diffusion Layer

R. Pushpangadan[1], A. Soman[2], Arundas R.[2], N. G. Thoppan[2], S. P. Duttagupta[1]
[1]Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
[2]College of Engineering, Munnar, Kerala, India

PEM fuel cells are very promising for portable applications. A key component of fuel cell is the flow field plate through which hydrogen will reach the anode, oxygen will reach the cathode and electron collection. Flow field plate made of silicon is not a good electrical conductor , so ... En savoir plus

Modeling of Chemo-Mechanical Coupled Behavior of Cement Based Material

D. Hu[1], F. Zhang[2], H. Zhou[3], and J. Shao[1]
[1]LML, UMR8107, CNRS, University of Lille I, Lille, France
[2]School of Civil Engineering and Architecture, Hubei University of Technology, Wuhan, China
[3]State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, China

A lixiviation-mechanical coupled model is developed for fiber reinforced concrete within this framework; both the influence of chemical degradation on short and long term mechanical behavior and the influence of mechanical loading on the diffusion coefficient can be considered. The ... En savoir plus

Biosimulation of Normal Pressure Hydrocephalus Using COMSOL Multiphysics^®

K. Shahim[1], J-M. Drezet[1], J-F. Molinari[2], S. Momjian[3], and R. Sinkus[4]

[1]LSMX, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[2]LSMS, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[3]University Hospitals of Geneva and University of Geneva, Switzerland
[4]Waves and Acoustics Laboratory, ESPCI, Paris, France

A numerical finite element model of one human brain is built in COMSOL in order to study a particular form of hydrocephalus, the so called Normal Pressure Hydrocephalus (NPH). The geometry of the ventricles and the skull is obtained by Magnetic Resonance Imaging (MRI) and imported in ... En savoir plus

Premier

851–860 of 931

Dernier