- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
FT wind sensors measure wind speed and direction using an acoustic field superimposed on a flow field in an acoustic resonator equipped with three piezoelectric transducers. The study proposed here focuses on the acoustic resonance technology of a simplified wind sensor geometry, and how ... En savoir plus
Examples of Electromagnetic processes are presented: (1) cold crucible, (2) electromagnetic pump, (3) DC electromagnetic brake. A combined approach by using multiphysics modeling with Comsol and experimental validation is used in order to give some guidelines for process improvement and ... En savoir plus
Used for welding, cutting, deposition by projection, for the treatement of waste, or in analysis for ICP torches, for the synthesis of high purity silica or for the manufacture of nanometric powders or nanoparticules, thermal plasmas are fundamental in processing of materials and in ... En savoir plus
A design method for BHE fields in the absence of groundwater flow is presented, based on the superposition of effects. The effects of any periodic heat load with a period of one year can be obtained by a weighted sum of the effects of a monthly unit step heat load, properly displaced in ... En savoir plus
Accurate, real-time measurement of arterial oxygen partial pressure (PaO₂) is essential for managing respiratory diseases and critical care conditions. Traditional arterial blood sampling for PaO₂ is invasive, painful, and provides intermittent snapshots rather than continuous ... En savoir plus
The computation of electric field strength is the state-of-the-art technique for designing and optimizing High-Voltage (HV) equipment. In this research, the equipment under analysis is Cable Termination (CaTr) which is used to apply high-voltage (75 kV – 800 kV AC) on the cable to be ... En savoir plus
Reducing greenhouse gas emissions and finding new ecological and renewable energy sources are among the biggest challenges humanity is facing nowadays [1] [2]. At the same time, power requirements are increasing constantly, where primary energy consumption is intrinsically accompanied by ... En savoir plus
The study of multiphase flows inside the microfluidic devices has received much attention recently because of its applications in heat and mass transfer, mixing, microreaction, emulsification and most importantly in MEMS and lab-on-a-chip. We study the influence of an electric field on ... En savoir plus
The continuous inkjet technology is widely used in the industry for marking and coding, and reposes on the emission of charged droplets at high velocity and high frequency. The shape of the droplets and the length needed for the jet breakup are important indicators when designing a ... En savoir plus
This study presents a model for simulating a subsurface pumped-hydro energy storage (battery) system. The model captures the coupling between fluid flow in an oil and gas type wellbore connected to a large hydraulic fracture embedded in a low-permeability reservoir. By integrating ... En savoir plus