Articles techniques et présentations

Flexible electronics are temporarily affixed to a rigid carrier such as glass or silicon prior to device fabrication to facilitate robotic handling of the device, but also to allow optical lithography to stay within overlay design registration budget; without the rigid carrier, a ... En savoir plus

Introduction: Medium voltage reclosers are representing nowadays an important link between transmission power systems and low voltage grids. With a high level of renewable energy penetration, the medium voltage networks are becoming bidirectional. Therefore, the associated switching ... En savoir plus

The AC losses that superconducting magnet systems experience during transient events are an important design consideration in fusion reactors. We present results on the approach for calculating AC losses in the high temperature superconducting (HTS) toroidal field (TF) magnets of the ... En savoir plus

Induction motors, as any other industrial products, have to comply with various requirements on noise levels. Therefore, it is essential to use an appropriate prediction tool to verify and optimize the design of an induction motor with respect to the acoustic performances. The paper ... En savoir plus

The current general context for green production and decarbonation prompts considering alternative solutions to produce high added value byproducts from gas decomposition without producing CO2. Steam Reforming or Combustion processes, widely applied in Industry, need H2O or O2 to ... En savoir plus

Vacuum distillation furnaces (VDFs) are employed for purification and consolidation of heavy metals from their dendritic forms which are entrained with molten salts. The VDF is an induction heated furnace which is operated at a temperature of 700-1400 °C and at a pressure of 0.01-600 ... En savoir plus

Electromagnetic force and density in the electric-machinery dynamic system are fundamental forces which cause physical phenomena such as structural deformation, vibration, noise etc. But when two materials are contacted, electromagnetic contact force and distribution by conventional ... En savoir plus

The rotating permanent magnet heater is an high efficient system for the electromagnetic heating of Aluminium billet bifore the extrusion process. In the paper will explained how to modeling with COMSOL Multiphysics® the system form the electromagnetic point of view using the ACDC ... En savoir plus

Field-emitter (FE) electron sources offer significant advantages over photocathode and thermionic sources due to their ability to be operated without the need for an auxiliary laser system or a heating source. While FE cathodes have been traditionally used in DC environments, we explore ... En savoir plus

In this paper a poly-optimization of the design of the electromechanical actuator is presented. The shape of the actuator is defined by the decision variables. The number of decision variables under consideration is up to ten but in the next step while the multi-coils system will be ... En savoir plus