Articles techniques et présentations

Parametric finite element simulations were performed to study the effect of film thickness, and electrode size on the different impedance parameters for insulating thin films deposited on a conductive substrate. COMSOL Multiphysics® was used to solve the quasi-static form of Maxwell’s ... En savoir plus

FT wind sensors measure wind speed and direction using an acoustic field superimposed on a flow field in an acoustic resonator equipped with three piezoelectric transducers. The study proposed here focuses on the acoustic resonance technology of a simplified wind sensor geometry, and how ... En savoir plus

The frequency dependent electrical impedance of porous media is studied by modelling the charge transport in the electrolyte filled pore space using COMSOL Multiphysics.  The corresponding experimental method, called Spectral Induced Polarization (or Impedance Spectroscopy), shows a ... En savoir plus

Cylindrical grinding has become an integral part of machining of workpieces with an ultra-high precision and higher throughput. The grinding process involves the mechanical interaction of the grinding blade with the workpiece at relatively higher rotation speeds, with a higher energy ... En savoir plus

This paper presents a new design methodology of quasi-conformal transformation optics (QCTO) based modified Luneburg lens antennas using a broadband anti-reflective (AR) layer. The design used QCTO technique to modify portion of the lens’s spherical geometry into a flat surface for ... En savoir plus

The growing adoption of electric vehicles has led to increased exposure of cars to stray magnetic fields. To address this issue, inductive position sensors have emerged as a viable solution due to their inherent immunity to stray magnetic fields. Widespread adoption of the inductive ... En savoir plus

Differential Acoustic Resonance Spectroscopy (DARS) was developed to examine changes in the resonant frequencies of a cavity perturbed by the introduction of a centimetre-sized sample. This laboratory-based measurement technique fills an experimental gap between the low-frequency stress ... En savoir plus

The ideal way to measure the acoustic performance of heavy items such as vehicles or machines is in a semi-anechoic chamber, i.e. in an environment with no reflections except from the solid floor where the noise source is standing. To accurately measure low frequencies down to 20 Hz ... En savoir plus

The scaling down of Copper interconnects is an effective approach to increasing the number of signal I/O lines and performance in advanced fine-pitch packaging. However, as dimensions are reduced, the risk of electromigration-induced failures in the copper interconnects becomes ... En savoir plus

This work is concerned with the study of the asymmetrical phenomenon observed in three-phase transformers during the standard short-circuit test. The purpose of our work is to see if the asymmetric measurements can be predicted with the use of 2D finite-element models. To this end, we ... En savoir plus