Consultez les proceedings de la Conference COMSOL 2024
This paper reports the design of a piezoelectric energy harvesting micro generator for an energy autonomous tire pressure monitoring wireless sensor node. For our design we use a piezoelectric MEMS generator approach without additional mass. The intrinsic mass of the cantilever is in the ... En savoir plus
The aim of this study is to use tracking of flow artifacts in Magnetic Resonance Imaging of fluids to validate CFD. Phase Contrast MRI will also be used for comparison. The correlation between flow of the fluid and movement of the artifacts is investigated using an aorta flow phantom, ... En savoir plus
In proper designs of hydrogen storage systems based on metal hydrides three processes are modelled and simulated: hydrogen flow (through the metal hydride bed), solid-state chemical transformation, and heat transfer (due to the highly exothermic chemical transformation). In this work, ... En savoir plus
In this work the authors report on a CFD simulation of a pipe flow model. Fluid mechanics are here combined with heat transfer phenomena. To create a mathematical model of a pulsed hot wire system i.e., the thermo-fluidic impulse response of a pulsed hot wire, a simulation model is going ... En savoir plus
The principle of electrochemical machining (ECM) is the anodic dissolution of a metallic workpiece at the interface to a liquid ionic conductor under the influence of electric charge transport. This erosion principle works independently from the mechanical hardness of the workpiece and ... En savoir plus
The flux of a fluid in permeable media can be modelled using a continuous. To link the real system with the continuous model is mandatory to realize a suitable average of the equations and of the variables. The dispersion term comes from this averaging but it is not only a mathematical ... En savoir plus
The high thermal stability and fast start-up behavior make micro-tubular solid oxide fuel cells (SOFCs) a promising alternative for small-scale, mobile power devices in the range of some Watts. To understand the transport phenomena inside a single micro-tubular SOFC, a 2-D, axi ... En savoir plus
Use of COMSOL Multiphysics equation-based model capability to solve optimization and control problems. Solution of time-dependent problems with space-time finite elements. Solution of constraint optimization problems. Mathematical back-up for equation-based optimization. En savoir plus
The model proposed by Schneider et al., for polymers is herein adapted in order to assess its suitability in elucidating the thixotropic behavior of aluminum alloys. The COMSOL Multiphysics program is employed to solve the inherent coupled mathematical problem, consisting in the ... En savoir plus
For the development of bioreactor systems, it is reasonable to develop working simulations, to avoid a lot \"trial-and-error\" experiments. Our research goal is the creation of functioning bone grafts for transplantation. Therefore stem cells get homogenously seeded into porous ceramic ... En savoir plus