Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Consultez les proceedings de la Conference COMSOL 2020

MEMS and Nanotechnologyx

A Study of the Effects of Mounting Supports, and Dissipation on a Piezoelectric Quartz Double-Ended Tuning Fork Gyroscope

G. Choi[1], Y. Yong[1]
[1]Rutgers University, New Brunswick, NJ, USA

A COMSOL model of a piezoelectric quartz double ended tuning fork gyroscope was implemented. The gyroscope has two detection modes; the first mode detects the angular velocity about a z-axis perpendicular to the tuning fork plane (x-y plane), while the second mode detects the angular ... En savoir plus

Multiphysics FEM Simulations Approach for Development of a MEMS Heat Generator

G. S. Masi[1], S. V. De Guido[1], G. Montagna[2], C. Martucci[2], P. M. Congedo[1], L. Vasanelli [1], M. G. Manera[2], R. Rella[2]
[1]Department of Innovation Engineering, University of Salento, Lecce, Italy
[2]CNR-IMM, Lecce, Italy

Introduction: Accurate fluid temperature control in microfluidic channels is a requirement for many lab-on-chip and micro-reactors.Thin films resistive metal heaters have proven to be the best choice for localizing heating applications with integrated microfluidic systems. A thin ... En savoir plus

Simulation of Piezoelectric Transformers with COMSOL

T. Andersen[1], M. A. E. Andersen[1], O. C. Thomsen[1]
[1]DTU Elektro, Technical University of Denmark, Kgs. Lyngby, Denmark

In this work COMSOL is utilized to obtain the Mason lumped parameter model for a piezoelectric transformer (PT) design. The Mason lumped parameters are relevant in the design process of power converters. The magnitude of the impedance is simulated for a specific interleaved multilayer ... En savoir plus

Efficient Generation of Surface Plasmon Polaritons with Asymmetric Nano-structures

J. Chen
Peking University
China

This paper covers the following: * All-Optical Light Modulation of surface plasmon polaritons (SPPs) is achieved using asymmetric single nanoslits. A high on/off switching ratio of >20 dB and phase variation of >? were observed with the device lateral dimension of only about 2 ?m. * ... En savoir plus

Numerical Study of Exciton States of Core?shell CdTe/CdS Nanotetrapods by using COMSOL Multiphysics

Y. Yao?and K. Sakoda
National Institute for Materials Science
University of Tsukuba
Japan

This paper showed: * The electronic states of core-shell tetrapod with various shell thickness were calculated. Lowest 20 electron and hole wave functions have A1 or T2 symmetry. * At t=1.2 nm, the carriers separation is not serious, core-shell tetrapod is not apparent type II ... En savoir plus

Optical Manipulation of Microscopic Objects

R. Ozawa
Yokohama University
Japan

In recent years, optical manipulation using optical radiation pressure has been widely studied. In this study, the radiation pressure exerted on various kinds of microscopic objects with different laser beams was evaluated by COMSOL Multiphysics software. By changing beam shapes, ... En savoir plus

Single Crystal Diamond NEMS Switch

M. Liao
Optical and Electronic Materials Unit
National Institute for Materials Science
Japan

A single-crystal diamond NEMS switch was fabricated while batch production of SCD MEMS/NEMS structures were developed. The diamond NEMS switches exhibit high performance with respect to high controllability, high reproducibility, and good reliability. Modeling and simulations were made ... En savoir plus

Design of Traveling Wave Ultrasonic Vibration Disk for Nano-particles in Liquid Dispersion

J. Muraoka, and T. Suzuki
Yamagata Research Institute of Technology
Yamagata
Japan

The traveling wave ultrasonic vibration disks for dispersion of particles were designed by using of FEM analysis. The vibration disks are required specific vibration pattern, which contains three nodal lines. The vibration disk thickness was calculated to be matched the resonance ... En savoir plus

Modeling an electric cell actuator and loudspeaker using COMSOL Multiphysics

W. J. Wu
NTU Nano-Bio MEMS Group
National Taiwan University,
Taiwan

This presentation presented the following: * The building of an FEA model of an electric cell actuator using COMSOL Multiphysics * Validation of this model through the AVID and ESPI measurement systems * The building of an FEA model of an electric loudspeaker using COMSOL Multiphysics * ... En savoir plus

Design and Simulation of MEMS Based Electrothermal Micromirror for 3D Spatial Movement

D. Mallick, and A. Bhattacharyya
Institute of Radio Physics and Electronics
University of Calcutta
West Bengal, India

Micromirror is a versatile MEMS device, which finds use in many application areas. In this paper, we have addressed the issues related to the design and behavioral simulation of MEMS based electro-thermal micromirror [Figure 1] for 3D motion. Two types of thermal actuation mechanism are ... En savoir plus