Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problem with importing files

Please login with a confirmed email address before reporting spam

Hi.
When I am trying to import file of the .x_t or igs format an error occures: C:Program Files\COMSOL\COMSOL43\lib\win64\csjcad.dll: %1 is not an application of Win 32.

2 Replies Last Post 26 oct. 2012, 01:40 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 oct. 2012, 01:32 UTC−4
Hi

you need the CAD module I believe for Parasolid files, seems that either its not there, on badly installed. Check your licences (Options Licences)

--
Good luck
Ivar
Hi you need the CAD module I believe for Parasolid files, seems that either its not there, on badly installed. Check your licences (Options Licences) -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 oct. 2012, 01:40 UTC−4
Thank you Ivar for your help.
Thank you Ivar for your help.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.