COMSOL Multiphysics®
  • Electromagnétisme
  • Mécanique et acoustique
  • Fluide & thermique
  • Chimie
  • Outils Polyvalents
  • Interfaces

Vidéos disponibles


Durée: 17:02

Keynote: Automotive Audio in the Digital Age

The goal of audio systems is to recreate live sound as accurately as possible, no matter where they are being used. However, this goal is not so easily achieved when dealing with automotive audio ...

Durée: 18:01

Keynote: Developing Cardiovascular Medical Devices with Simulation

The ASCATIM project is focused on the management of a major heart problem that affects people worldwide: myocardial infarction. In this keynote talk from COMSOL Day: Biomedical Technologies, ...

Durée: 19:13

Keynote: How Fast-Charging XNO Batteries Could Transform E-Mobility

Optimizing the safety and performance of the batteries used in electric vehicles and portable devices is complex, as batteries are described by an interplay of solid-state physics, chemistry, ...

Durée: 4:28

Get an Inside Look at an Innovative Rainwater Drainage System

Step into a busy neighborhood in Copenhagen, Denmark, to see how a multidisciplinary urban planning team used simulation to address a major problem in the city: overflowing drainage systems due to ...

Durée: 16:58

Explaining an Electromagnetics Brainteaser with Simulation

There was a video that generated a lot of buzz online because it featured a popular electromagnetics brainteaser. Simply put, the brainteaser asks: "When you close the switch in a circuit — ...

Durée: 21:20

Keynote: Developing High-Speed Digital Connectors Using COMSOL®

In a keynote talk at COMSOL Day: Sensors, Antennas, & IoT, Eric Gebhard of Signal Microwave explains the crucial role of RF modeling with COMSOL Multiphysics® in Signal’s product ...

Durée: 16:57

Keynote: Topology Optimization for an Efficient Design of an Electric Motor

In a keynote talk at COMSOL Day: Vehicle Electrification, Steffen Rothe of Volkswagen Group Components shares how they use multiphysics simulation and optimization to design an electric motor with ...

Durée: 14:48

Keynote: State-of-the-Art Loudspeaker Simulation Including Shape and Topology Optimization

In a keynote talk at COMSOL Day: Acoustics, René Christensen of Acculution discusses loudspeaker simulation and shares examples from his own work. He begins with an overview of how simulation is ...

Durée: 13:55

Keynote: Acoustic Simulation of Exhaust After-Treatment Systems

In a keynote talk at COMSOL Day: Acoustics, Naveen Indolia of SCANIA CV AB discusses how they use simulation to analyze exhaust after-treatment system designs for heavy vehicles. In the ...

Durée: 20:11

Keynote: Designing a MEMS Acoustic Flow Microphone

Soundskrit is revolutionizing the way sound is measured by developing a new generation of microphone technology. Unlike traditional microphones, which rely on sensing pressure to detect sound, their ...

Durée: 15:26

Keynote: COMSOL Multiphysics® for Applied Magnetics Modeling

In a keynote talk at COMSOL Day Canada, Jordan Morelli of Queen’s University discusses using COMSOL Multiphysics® to model systems in the general field of applied magnetics. He starts by ...

Durée: 47:17

Panel Discussion: Overcoming Design Challenges with Electromagnetics Modeling

In a panel discussion from COMSOL Day: Low-Frequency EM, panelists from four different organizations discuss how they use simulation for overcoming design challenges in various low-frequency ...

Durée: 18:14

Keynote: Low-Voltage, Deformable Mirror System Driven by MEMS-Based Lorentz Actuator Arrays

In this keynote talk from COMSOL Day: Microsystems, Byoungyoul Park of the Nanotechnology Research Center (NRC) discusses: A massive telescope development project that will have nine times the ...

Durée: 20:34

Keynote: RF-Induced Heating of Medical Devices in Open-Bore MRI

More than 80 million MRI scans are conducted throughout the world every year, and many of the patients undergoing the scans have implanted medical devices. To keep patients safe, it is important to ...

Durée: 27:44

Keynote: Blood Damage Modeling of FDA Benchmark Nozzle

In this archived keynote talk from COMSOL Day: Biomedical Devices, Dr. Alireza Kermani of Veryst Engineering discusses mechanical hemolysis, blood damage models, and how to simulate an FDA benchmark ...

Premier
Précédent
1–15 of 219

Durée: 17:02

Keynote: Automotive Audio in the Digital Age

The goal of audio systems is to recreate live sound as accurately as possible, no matter where they are being used. However, this goal is not so easily achieved when dealing with automotive audio ...

Durée: 18:01

Keynote: Developing Cardiovascular Medical Devices with Simulation

The ASCATIM project is focused on the management of a major heart problem that affects people worldwide: myocardial infarction. In this keynote talk from COMSOL Day: Biomedical Technologies, ...

Durée: 19:13

Keynote: How Fast-Charging XNO Batteries Could Transform E-Mobility

Optimizing the safety and performance of the batteries used in electric vehicles and portable devices is complex, as batteries are described by an interplay of solid-state physics, chemistry, ...

Durée: 4:28

Get an Inside Look at an Innovative Rainwater Drainage System

Step into a busy neighborhood in Copenhagen, Denmark, to see how a multidisciplinary urban planning team used simulation to address a major problem in the city: overflowing drainage systems due to ...

Durée: 16:58

Explaining an Electromagnetics Brainteaser with Simulation

There was a video that generated a lot of buzz online because it featured a popular electromagnetics brainteaser. Simply put, the brainteaser asks: "When you close the switch in a circuit — ...

Durée: 21:20

Keynote: Developing High-Speed Digital Connectors Using COMSOL®

In a keynote talk at COMSOL Day: Sensors, Antennas, & IoT, Eric Gebhard of Signal Microwave explains the crucial role of RF modeling with COMSOL Multiphysics® in Signal’s product development process. In the ...

Durée: 16:57

Keynote: Topology Optimization for an Efficient Design of an Electric Motor

In a keynote talk at COMSOL Day: Vehicle Electrification, Steffen Rothe of Volkswagen Group Components shares how they use multiphysics simulation and optimization to design an electric motor with ...

Durée: 14:48

Keynote: State-of-the-Art Loudspeaker Simulation Including Shape and Topology Optimization

In a keynote talk at COMSOL Day: Acoustics, René Christensen of Acculution discusses loudspeaker simulation and shares examples from his own work. He begins with an overview of how simulation is ...

Durée: 13:55

Keynote: Acoustic Simulation of Exhaust After-Treatment Systems

In a keynote talk at COMSOL Day: Acoustics, Naveen Indolia of SCANIA CV AB discusses how they use simulation to analyze exhaust after-treatment system designs for heavy vehicles. In the ...

Durée: 20:11

Keynote: Designing a MEMS Acoustic Flow Microphone

Soundskrit is revolutionizing the way sound is measured by developing a new generation of microphone technology. Unlike traditional microphones, which rely on sensing pressure to detect sound, their ...

Durée: 15:26

Keynote: COMSOL Multiphysics® for Applied Magnetics Modeling

In a keynote talk at COMSOL Day Canada, Jordan Morelli of Queen’s University discusses using COMSOL Multiphysics® to model systems in the general field of applied magnetics. He starts by sharing three ...

Durée: 47:17

Panel Discussion: Overcoming Design Challenges with Electromagnetics Modeling

In a panel discussion from COMSOL Day: Low-Frequency EM, panelists from four different organizations discuss how they use simulation for overcoming design challenges in various low-frequency ...

Durée: 18:14

Keynote: Low-Voltage, Deformable Mirror System Driven by MEMS-Based Lorentz Actuator Arrays

In this keynote talk from COMSOL Day: Microsystems, Byoungyoul Park of the Nanotechnology Research Center (NRC) discusses:

  • A massive telescope development project that will have nine times the ...

Durée: 20:34

Keynote: RF-Induced Heating of Medical Devices in Open-Bore MRI

More than 80 million MRI scans are conducted throughout the world every year, and many of the patients undergoing the scans have implanted medical devices. To keep patients safe, it is important to ...

Durée: 27:44

Keynote: Blood Damage Modeling of FDA Benchmark Nozzle

In this archived keynote talk from COMSOL Day: Biomedical Devices, Dr. Alireza Kermani of Veryst Engineering discusses mechanical hemolysis, blood damage models, and how to simulate an FDA benchmark ...

Durée: 17:02

Keynote: Automotive Audio in the Digital Age

The goal of audio systems is to recreate live sound as accurately as possible, no matter where they are being used. However, this goal is not so easily achieved when dealing with automotive audio ...

Durée: 18:01

Keynote: Developing Cardiovascular Medical Devices with Simulation

The ASCATIM project is focused on the management of a major heart problem that affects people worldwide: myocardial infarction. In this keynote talk from COMSOL Day: Biomedical Technologies, ...

Durée: 19:13

Keynote: How Fast-Charging XNO Batteries Could Transform E-Mobility

Optimizing the safety and performance of the batteries used in electric vehicles and portable devices is complex, as batteries are described by an interplay of solid-state physics, chemistry, ...

Durée: 4:28

Get an Inside Look at an Innovative Rainwater Drainage System

Step into a busy neighborhood in Copenhagen, Denmark, to see how a multidisciplinary urban planning team used simulation to address a major problem in the city: overflowing drainage systems due to ...

Durée: 16:58

Explaining an Electromagnetics Brainteaser with Simulation

There was a video that generated a lot of buzz online because it featured a popular electromagnetics brainteaser. Simply put, the brainteaser asks: "When you close the switch in a circuit — ...

Durée: 21:20

Keynote: Developing High-Speed Digital Connectors Using COMSOL®

In a keynote talk at COMSOL Day: Sensors, Antennas, & IoT, Eric Gebhard of Signal Microwave explains the crucial role of RF modeling with COMSOL Multiphysics® in Signal’s product development process. In the ...

Durée: 16:57

Keynote: Topology Optimization for an Efficient Design of an Electric Motor

In a keynote talk at COMSOL Day: Vehicle Electrification, Steffen Rothe of Volkswagen Group Components shares how they use multiphysics simulation and optimization to design an electric motor with ...

Durée: 14:48

Keynote: State-of-the-Art Loudspeaker Simulation Including Shape and Topology Optimization

In a keynote talk at COMSOL Day: Acoustics, René Christensen of Acculution discusses loudspeaker simulation and shares examples from his own work. He begins with an overview of how simulation is ...

Durée: 13:55

Keynote: Acoustic Simulation of Exhaust After-Treatment Systems

In a keynote talk at COMSOL Day: Acoustics, Naveen Indolia of SCANIA CV AB discusses how they use simulation to analyze exhaust after-treatment system designs for heavy vehicles. In the ...

Durée: 20:11

Keynote: Designing a MEMS Acoustic Flow Microphone

Soundskrit is revolutionizing the way sound is measured by developing a new generation of microphone technology. Unlike traditional microphones, which rely on sensing pressure to detect sound, their ...

Durée: 15:26

Keynote: COMSOL Multiphysics® for Applied Magnetics Modeling

In a keynote talk at COMSOL Day Canada, Jordan Morelli of Queen’s University discusses using COMSOL Multiphysics® to model systems in the general field of applied magnetics. He starts by sharing three ...

Durée: 47:17

Panel Discussion: Overcoming Design Challenges with Electromagnetics Modeling

In a panel discussion from COMSOL Day: Low-Frequency EM, panelists from four different organizations discuss how they use simulation for overcoming design challenges in various low-frequency ...

Durée: 18:14

Keynote: Low-Voltage, Deformable Mirror System Driven by MEMS-Based Lorentz Actuator Arrays

In this keynote talk from COMSOL Day: Microsystems, Byoungyoul Park of the Nanotechnology Research Center (NRC) discusses:

  • A massive telescope development project that will have nine times the ...

Durée: 20:34

Keynote: RF-Induced Heating of Medical Devices in Open-Bore MRI

More than 80 million MRI scans are conducted throughout the world every year, and many of the patients undergoing the scans have implanted medical devices. To keep patients safe, it is important to ...

Durée: 27:44

Keynote: Blood Damage Modeling of FDA Benchmark Nozzle

In this archived keynote talk from COMSOL Day: Biomedical Devices, Dr. Alireza Kermani of Veryst Engineering discusses mechanical hemolysis, blood damage models, and how to simulate an FDA benchmark ...

Premier
Précédent
1–15 of 219