Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Non - Isothermal Flow (nitf)

Please login with a confirmed email address before reporting spam

Sir,

I have assigned materials to the domain elements that are required. And, in the step of inspecting the physics part after assigning materials, it is again asking for domain selection. What does that mean?

So for Non-Isothermal Fluid flow (nitf), is it okay of I select the fluid (ie.. water in my case) or should I select solids also. as heat transfer takes place from solid to fluid and viceversa.


1 Reply Last Post 28 janv. 2013, 06:51 UTC−5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28 janv. 2013, 06:51 UTC−5
Hi

NITF is normally a composed physics with thermal exchange between FLUID and Structure (solid).
So when you arrive to the physics nodes, you need to define the SOLID domains (volumes in 3D, surfaces in 2D) and the FLUID domains, then apply the relevant input, output, of fluid, outflow (of heat), fixed temperatures ... and whatever other BC (Boundary Consitions) which describe your model

--
Good luck
Ivar
Hi NITF is normally a composed physics with thermal exchange between FLUID and Structure (solid). So when you arrive to the physics nodes, you need to define the SOLID domains (volumes in 3D, surfaces in 2D) and the FLUID domains, then apply the relevant input, output, of fluid, outflow (of heat), fixed temperatures ... and whatever other BC (Boundary Consitions) which describe your model -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.