Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to simulating the free-fall phenomenon of a 3D model?

Please login with a confirmed email address before reporting spam

Hi pros,

I am interested in using COMSOL Multiphysics for simulating various phenomenons in real-world. I see that this software is very strong software for simulating heat, electric,...but for mechanics, it is so few of use.

in fact that, i want to simulate a body free fall into other body under but i don't know how to do in COMSOL GUI, how to add physics, how to apply gravity accelerater? how?

Any tutorials are considers,

AnhNT,

1 Reply Last Post 13 août 2010, 02:56 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13 août 2010, 02:56 UTC−4
Hi
COMSOL is not really set up as a rigid body analysis programme, but still you can do quite a lot with it.
There are other tools such as MapleSim or Modelica that are more oriented in this direction

In COMSOL. for the gravity force, it's called (as in standard physics) a "body force" or "body load" and is expressed as [N/m^3] that is each "dm=rho*dV" sees a force, expressed as the gravity acceleration times the density.

In 3.5 this is typically "G*rho_smsld" where G is a constant defined as 1[lbf/lb] or just 9.81[m/s^2]

in 4.0 tis is defined as "g_const*solid.rho" where g_const is the internal value of the gravity acceleration

You still need to orient the gravity vector as you want with the correct sign

--
Good luck
Iva
Hi COMSOL is not really set up as a rigid body analysis programme, but still you can do quite a lot with it. There are other tools such as MapleSim or Modelica that are more oriented in this direction In COMSOL. for the gravity force, it's called (as in standard physics) a "body force" or "body load" and is expressed as [N/m^3] that is each "dm=rho*dV" sees a force, expressed as the gravity acceleration times the density. In 3.5 this is typically "G*rho_smsld" where G is a constant defined as 1[lbf/lb] or just 9.81[m/s^2] in 4.0 tis is defined as "g_const*solid.rho" where g_const is the internal value of the gravity acceleration You still need to orient the gravity vector as you want with the correct sign -- Good luck Iva

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.