La Bibliothèque de Modèles présente des modèles construits avec COMSOL Multiphysics pour la simulation d'une très grande variété d'applications, dans les domaines électrique, mécanique, fluidique et chimique. Vous pouvez télécharger ces modèles résolus avec leur documentation détaillée, notamment les instructions de construction pas à pas, et vous en servir comme point de départ de votre travail de simulation. Utilisez l'outil de recherche rapide pour trouver les modèles correspondant à votre domaine d'intérêt, et connectez vous avec votre compte COMSOL Access, associé à une licence COMSOL, afin de télécharger les fichiers modèles.
Heat Transfer Modulex

Silica Glass Block Coated with a Copper Layer

In this time-dependent model, a silica block of glass, coated with a thin copper layer is subjected to a heat flux. Copper is a highly conductive material, while the silica glass is of poor thermal conductivity, which sets up an highly-varied temperature differential. The model must ... En Savoir Plus

Thermo-Photo-Voltaic Cell

This model illustrates an application that maximizes surface-to-surface radiative fluxes and minimizes conductive heat fluxes. A thermo-photo-voltaic (TPV) cell generates electricity from the combustion of fuel and through radiation. The fuel burns inside an emitting device that ... En Savoir Plus

Nonisothermal MEMS Heat Exchanger

The example concerns a stainless-steel MEMS heat exchanger, which you can find in lab-on-a-chip devices in biotechnology and in microreactors such as for micro fuel cells. This model examines the heat exchanger in 3D, and it involves heat transfer through both convection and ... En Savoir Plus

Finned Pipe

Finned pipes are used for coolers, heaters, or heat exchangers to increase heat transfer. They come in different sizes and designs depending on the application and requirements. When the fins are placed outside the pipe, they increase the heat exchange surface of the pipe so that a ... En Savoir Plus

Thermal Bridges in Building Construction — 3D Iron Bar Through Insulation Layer

This model studies the heat conduction in a thermal bridge made up of an iron bar and an insulation layer that separates a hot internal side from a cold external side. The heat flux between internal and external side and the maximum temperature on the external wall are compared them with ... En Savoir Plus

Simulation of RF Tissue Ablation

This example exemplifies how to model tissue ablation through applying RF radiation. A more detailed description of the phenomenon, and the modeling process, can be seen in the blog post "[Study Radiofrequency Tissue Ablation Using Simulation](/blogs/study-radiofrequency-tissue-ablation ... En Savoir Plus

Action on Structures Exposed to Fire — Thermal Elongation

This entry is a compilation of some examples from DIN EN 1991-1-2 (Actions on structures exposed to fire). Models that are included: 1. Cooling (HT) 2. Heating (HT) 3. Heat transfer through multiple layers (HT) 4. Thermal elongation (SME, thermal stress) 5. Thermal expansion (SME, HT, ... En Savoir Plus

Calculating Mass and Energy Balances

This tutorial model can be used to learn how to calculate mass and energy balances. Get a detailed demonstration in this blog post: [How to Calculate Mass Conservation and Energy Balance](https://www.comsol.com/blogs/how-to-calculate-mass-conservation-and-energy-balance/) En Savoir Plus

Buoyancy Flow in Water

This example studies the stationary state of free convection in a cavity filled with water and bounded by two vertical plates. To generate the buoyancy flow, the plates are heated at different temperatures, bringing the regime close to the transition between laminar and turbulent. To ... En Savoir Plus

Convective Cooling of a Potcore Inductor

The inductor is a common component in a variety of electrical devices. Its applications include power transformation and measurements, and it can also be used together with capacitors to create oscillators. In small devices with many components, such as in laptops, heat generation can ... En Savoir Plus