Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to apply a constant current
Posted 3 févr. 2011, 22:55 UTC−5 Low-Frequency Electromagnetics Version 3.5a 1 Reply
Please login with a confirmed email address before reporting spam
I want to model a transformer winding in 2D in different frequencies and calculate the resistances. I need to apply a constant value of current to these conductor, which have equal amount of current, but I do not know how to do it. Please help me in this case.
1 Reply Last Post 4 févr. 2011, 08:34 UTC−5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
If ou had V4.1, I would say:
for me you sould start to read carefully the doc on the multi-turn coil BC's, then try them (bulk metal, single/multiple turn coils) out to with different BC's, and get a good understanding of how they work, then I believe you should be able t solve your model successfully
in 3,5 you do not have these nice new BC's (boundary Conditions) so you need to write out fully the equations.
There were a few threads about a year or more ago discussing multi turn coils in COMSOL 3.5
--
Good luck
Ivar
If ou had V4.1, I would say:
for me you sould start to read carefully the doc on the multi-turn coil BC's, then try them (bulk metal, single/multiple turn coils) out to with different BC's, and get a good understanding of how they work, then I believe you should be able t solve your model successfully
in 3,5 you do not have these nice new BC's (boundary Conditions) so you need to write out fully the equations.
There were a few threads about a year or more ago discussing multi turn coils in COMSOL 3.5
--
Good luck
Ivar