Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
project
Posted 23 mars 2011, 01:04 UTC−4 Studies & Solvers, Structural Mechanics 1 Reply
Please login with a confirmed email address before reporting spam
we have attached the solved design. we need this design to be animated. we need the graph also.how to bring the graph for this.............
Attachments:
1 Reply Last Post 23 mars 2011, 02:06 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
for animations you need to have a parametric sweep or a transient analysis, it's true that COMSOL does not animate one particular eigenmodes (SUGGESTION FOR COMSOL HERE ;)
But they do make an animation of all your modes as a film.
For that you need to hit the small Film icon or in the "Report" node, right click and add an animation
If you need to measure something in V4, you select a point and add a Derived Value operation, this fills in a table that you can transform into a plot with the Plot icon button, and tgen save in the report section
--
Good luck
Ivar
for animations you need to have a parametric sweep or a transient analysis, it's true that COMSOL does not animate one particular eigenmodes (SUGGESTION FOR COMSOL HERE ;)
But they do make an animation of all your modes as a film.
For that you need to hit the small Film icon or in the "Report" node, right click and add an animation
If you need to measure something in V4, you select a point and add a Derived Value operation, this fills in a table that you can transform into a plot with the Plot icon button, and tgen save in the report section
--
Good luck
Ivar