Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

What is reference temperature?

Posted 12 nov. 2019, 12:43 UTC−5 General, Computational Fluid Dynamics (CFD), Structural Mechanics 1 Reply

Aman Zahar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

dear everybody,

may i know the function of reference temperature? i've read somewhere that it is only imporatant for solid mechanics problem, is this true? does it play an important role for fluid flow and heat transfer coupling problem? I need to be sure. thank you

1 Reply Last Post 13 nov. 2019, 02:21 UTC−5
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 13 nov. 2019, 02:21 UTC−5

Hi Aman,

The reference temperature serves two purposes. The first one is the more obvious: it is the temperature at which there is no thermal strain in a solid. The thermal strain is computed as

The other purpose, also related to solid mechanics, is that the reference temperature at which the mass density is evaluated (if it is temperature dependent). For a physics interface which is formulated on the material frame, mass conservation dictates that the density must be constant during the simulation. Volume changes due to thermal expansion are taken care of only through the thermal strain. Any physics interface which is formulated on the material frame must have this interpretation of mass density.

The latter case can be thought of as "the reference temperature is the temperature at which the geometry is exactly the one I modeled".

The opposite case you can find in for example fluid dynamics where a fixed control volume is studied ('Eulerian formulation'). In this case, the mass of the fluid inside the control volume can change, and a truly temperature dependent density is appropriate. The reference temperature is irrelevant here.

Regards,
Henrik

-------------------
Henrik Sönnerlind
COMSOL
Hi Aman, The reference temperature serves two purposes. The first one is the more obvious: it is the temperature at which there is no thermal strain in a solid. The thermal strain is computed as \epsilon_{th} = \alpha (T-T_{ref}) The other purpose, also related to solid mechanics, is that the reference temperature at which the mass density is evaluated (if it is temperature dependent). For a physics interface which is formulated on the *material frame*, mass conservation dictates that the density must be constant during the simulation. Volume changes due to thermal expansion are taken care of only through the thermal strain. Any physics interface which is formulated on the material frame must have this interpretation of mass density. The latter case can be thought of as "the reference temperature is the temperature at which the geometry is exactly the one I modeled". The opposite case you can find in for example fluid dynamics where a fixed control volume is studied ('Eulerian formulation'). In this case, the mass of the fluid inside the control volume can change, and a truly temperature dependent density is appropriate. The reference temperature is irrelevant here. Regards, Henrik

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content