Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Linear motion of a magnet moving around a coil in 3D

Please login with a confirmed email address before reporting spam

The below post is related to an archived discussion


When modelling the linear motion of a magnet around a coil or other ferromagnetic materials in 3D, it seems that (1) moving mesh is requred for large motion; (2) magnetic field, no current interface is requred to enclose the identity pair so that continuity coupling only involves the magnetic scalar potential; (3) magnetic field interface is required for the domains with coil/current. The problem is: how to couple the magnetic field, no current interface with the magnetic field interfance. Without proper coupling, the two interfance just works separately. This coupling is automatic in rotating machinary.


1 Reply Last Post 8 juil. 2020, 14:47 UTC−4
Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 8 juil. 2020, 14:47 UTC−4

Hi,

you can use the functionality of the rmm interface for any kind of motion. Just set up the moving mesh outside rmm and do not use any moving mesh function inside rmm. Use the Mixed Formulation Boundary and vector- and scalar potential domains in rmm as appropriate.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, you can use the functionality of the rmm interface for any kind of motion. Just set up the moving mesh outside rmm and do not use any moving mesh function inside rmm. Use the Mixed Formulation Boundary and vector- and scalar potential domains in rmm as appropriate. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.