Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol with 2 CPU instead of using GPU

Please login with a confirmed email address before reporting spam

Hi! I am awared that comsol does not support GPU acceleration as stated before: https://www.comsol.com/forum/thread/250801/gpu-support?last=2020-02-03T13:32:52Z

However, I am planning to acquire a new PC with two Intel Xeon CPU instead of one with GPU to perform CFD simulations. My question is if I am going to be able to take full advantage of these two CPU when using Comsol or if it is not possible to do so.

What are your recomendations?

Greetings.


2 Replies Last Post 26 oct. 2020, 23:18 UTC−4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 26 oct. 2020, 10:03 UTC−4

Hello Eddy,

Yes, you will. All license types can take advantage of multiple CPUs on the same machine (shared memory parallelism). Only network licenses can take advantage of clusters (distributed memory parallelism).

Best,

Jeff

-------------------
Jeff Hiller
Hello Eddy, Yes, you will. All license types can take advantage of multiple CPUs on the same machine (shared memory parallelism). Only network licenses can take advantage of clusters (distributed memory parallelism). Best, Jeff

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 26 oct. 2020, 23:18 UTC−4

Hello Eddy,

Yes, you will. All license types can take advantage of multiple CPUs on the same machine (shared memory parallelism). Only network licenses can take advantage of clusters (distributed memory parallelism).

Best,

Jeff

Thank you very much Jeff :D

>Hello Eddy, > >Yes, you will. All license types can take advantage of multiple CPUs on the same machine (shared memory parallelism). Only network licenses can take advantage of clusters (distributed memory parallelism). > >Best, > >Jeff Thank you very much Jeff :D

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.