Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Script to add many point loads to geometry?

Posted 31 août 2021, 20:57 UTC−4 Structural & Acoustics, Geomechanics Version 5.5 4 Replies

Tom Parsons
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi - I'm new to Comsol, and coming from ANSYS where this problem would be easy. I have a very complex load defined at 10^6 points. Wondering if I can write a script to define points in the geomety and then apply forces at those points. Alternatively I could apply forces at nearest nodes if I knew how to find them. Or, I could spread the point loads into areas and define pressures, but I don't know how to define the areas for those loads either.

I can easily write a program to create a script, but not sure what it should say. Web serches haven't turned up anything. Thanks for any help.

4 Replies Last Post 2 sept. 2021, 21:09 UTC−4
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 1 sept. 2021, 05:39 UTC−4

To add perform a repetitive task, you can use either a Model Method, a Java Script, or (if you have such a license) Matlab scripting.

This said, adding 10^6 nodes to the model tree will make your model essentially impossible to work with. What is the background story for the 10^6 loads? Is it a distributed load that you try model in this way? If so, it is probably better to work with boundary loads and interpolation functions.

-------------------
Henrik Sönnerlind
COMSOL
To add perform a repetitive task, you can use either a Model Method, a Java Script, or (if you have such a license) Matlab scripting. This said, adding 10^6 nodes to the model tree will make your model essentially impossible to work with. What is the background story for the 10^6 loads? Is it a distributed load that you try model in this way? If so, it is probably better to work with boundary loads and interpolation functions.
Tom Parsons
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2 sept. 2021, 12:13 UTC−4

Thanks Henrik for your reply. They are individual known point loads. Your idea of interpolating the load is interesting. If I input a table with X, Y, Force (directed in Z) values and create an interpolated load, can I apply that to the model surface?

Thanks Henrik for your reply. They are individual known point loads. Your idea of interpolating the load is interesting. If I input a table with X, Y, Force (directed in Z) values and create an interpolated load, can I apply that to the model surface?
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2 sept. 2021, 18:59 UTC−4

The force components associated with a Boundary Load node can be functions of position, so I assume that an interpolation function can also be used there (haven't done this myself however).

Indeed, in Comsol almost any box that takes a numerical input will also accept functions.

The force components associated with a Boundary Load node can be functions of position, so I assume that an interpolation function can also be used there (haven't done this myself however). Indeed, in Comsol almost any box that takes a numerical input will also accept functions.
Tom Parsons
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2 sept. 2021, 21:09 UTC−4

Yes that works. One can enter int1(x,y) for a z-direction boundary load. Thanks!

Yes that works. One can enter int1(x,y) for a z-direction boundary load. Thanks!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content