Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Pyroelectric effect

Posted 12 août 2022, 12:02 UTC−4 MEMS & Piezoelectric Devices, Modeling Tools & Definitions, Physics Interfaces Version 6.0 2 Replies

UMA MAHESHWARAN
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I need to model pyroelectric device in comsol. I don't know how to do it. Can anyone sent any tutorial file to learn piezoelectric effect..?

2 Replies Last Post 15 août 2022, 08:57 UTC−4
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 12 août 2022, 12:32 UTC−4

Uma,

First you need to decide whether you want to simulate pyroelectric or piezoelectric effect. Those are different animals. For piezoelectricity you will find examples in the application library and maybe in the blog.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Uma, First you need to decide whether you want to simulate pyroelectric or piezoelectric effect. Those are different animals. For piezoelectricity you will find examples in the application library and maybe in the blog. Cheers Edgar
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 15 août 2022, 08:57 UTC−4

In version 6.1, to be released later this year, there will actually be two new multiphysics interfaces for modeling pyroelectricity. One that deals only with the electrical-thermal coupling, and one that involves also piezoelectricity.

But today, you would have to resort to equation based modeling, coupling for example Electrostatics and Heat Transfer in Solids if you want to model pyroelectricity.

-------------------
Henrik Sönnerlind
COMSOL
In version 6.1, to be released later this year, there will actually be two new multiphysics interfaces for modeling pyroelectricity. One that deals only with the electrical-thermal coupling, and one that involves also piezoelectricity. But today, you would have to resort to equation based modeling, coupling for example *Electrostatics* and *Heat Transfer in Solids* if you want to model pyroelectricity.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content