Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Batch Sweep
Posted 11 déc. 2024, 10:11 UTC+1 General Version 6.0 2 Replies
Please login with a confirmed email address before reporting spam
When I'm applying the batch scanning in COMSOL, I need to add quite a large number of model parameters (more than 100 different parameters). Due to the "Add parameters to file name" option in the COMSOL batch processing settings, this will cause the naming of the model files for parallel computing to exceed the maximum naming length allowed by the computer (generally, it's not allowed to exceed 255 characters). As a result, the parallel external process cannot be executed (the main reason being that the file name exceeds the limit). I'm wondering if there are any ways to avoid this problem or if the technical support team could offer some assistance. Thank you very much!
Please login with a confirmed email address before reporting spam
Hello,
To request support from COMSOL's technical support team, please use the support portal (www.comsol.com/support).
Best regards,
Jeff
-------------------Jeff Hiller
Please login with a confirmed email address before reporting spam
Hello,
To request support from COMSOL's technical support team, please use the support portal (www.comsol.com/support).
Best regards,
Jeff
Thank you for your reply. I've already submitted this problem to the technical support.