Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

casting of aluminium alloy

Posted 10 sept. 2013, 10:16 UTC−4 2 Replies

Mridusmita Sarma
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
i want to model the fluid flow during casting of al-si alloys. I have solved the model for laminar fluid flow but i cannot distinguish the point at which the alloy solidifies and velocity becomes zero before leaving the outlet.
2 Replies Last Post 19 juil. 2016, 19:56 UTC−4
Erik Bornhöft COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13 sept. 2013, 08:39 UTC−4
Dear Mridusmita Sarma,

although I cannot help you with your specific model, I would like to point you to two example models from our model library you might find useful as they are dealing with metal casting processes (they are also available from the COMSOL GUI in "View>Model Library"):
www.comsol.de/model/continuous-casting-382
www.comsol.de/model/fluid-structure-interaction-in-aluminum-extrusion-4386

There are also general models about phase change available, e.g.
www.comsol.de/model/phase-change-474

--
Hope that helps!

Best regards,
Erik

*********************
Erik Bornhöft
Senior Technical Sales Engineer
COMSOL Multiphysics GmbH
Robert-Gernhardt-Platz 1
37073 Göttingen
Germany

Knowledge Base:
www.comsol.de/support/knowledgebase/browse/900/

COMSOL Blog:
www.comsol.de/blogs/
Dear Mridusmita Sarma, although I cannot help you with your specific model, I would like to point you to two example models from our model library you might find useful as they are dealing with metal casting processes (they are also available from the COMSOL GUI in "View>Model Library"): http://www.comsol.de/model/continuous-casting-382 http://www.comsol.de/model/fluid-structure-interaction-in-aluminum-extrusion-4386 There are also general models about phase change available, e.g. http://www.comsol.de/model/phase-change-474 -- Hope that helps! Best regards, Erik ********************* Erik Bornhöft Senior Technical Sales Engineer COMSOL Multiphysics GmbH Robert-Gernhardt-Platz 1 37073 Göttingen Germany Knowledge Base: http://www.comsol.de/support/knowledgebase/browse/900/ COMSOL Blog: http://www.comsol.de/blogs/
Pooja Tilak
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 19 juil. 2016, 19:56 UTC−4
I do not understand how the mold cooling works in the continuous casting example (.mph available on COMSOL website)
Where is flow rate of water in mold defined?
I do not understand how the mold cooling works in the continuous casting example (.mph available on COMSOL website) Where is flow rate of water in mold defined?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content