Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

"Contact Pressure" vs. "Pressure"?

Posted 13 mars 2015, 10:47 UTC−4 Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers, Structural Mechanics Version 4.4 4 Replies

Daniel Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

When I compute "contact pressure" and "pressure" on the contact boundary and export the data, I get different answers (attached).

Does anyone know how does COMSOL caluclates "contact pressure" differently than "pressure"?

Thanks!

Daniel
4 Replies Last Post 17 mars 2015, 11:06 UTC−4
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15 mars 2015, 15:54 UTC−4
Hi,

These are completely different quantities. The contact pressure is the normal component of the traction on the contact surface (positive in compression, though).

The pressure variable is the mean stress; p = -trace(stress_tensor)/3

Regards,
Henrik
Hi, These are completely different quantities. The contact pressure is the normal component of the traction on the contact surface (positive in compression, though). The pressure variable is the mean stress; p = -trace(stress_tensor)/3 Regards, Henrik
Daniel Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16 mars 2015, 13:45 UTC−4
Henrik,

Thank you for the clarification. Can you tell me the formula that COMSOL uses to calculate the contact pressure? I tried n dot Sigma dot n on the contact surface, but that was not the correct formula (sigma is the stress tensor).

Thanks!

Daniel
Henrik, Thank you for the clarification. Can you tell me the formula that COMSOL uses to calculate the contact pressure? I tried n dot Sigma dot n on the contact surface, but that was not the correct formula (sigma is the stress tensor). Thanks! Daniel
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17 mars 2015, 02:58 UTC−4
Hi,

The contact pressure is a degree of freedom which is solved for (assuming that you are using the default augmented Lagrangian method). Please consult the theory section of the documentation for details.

Using 'n dot Sigma dot n' will in principle give the same quantity, but with significantly less accuracy since it is derived from the stresses in the element. Also, note that the 'n dot Sigma dot n' formulation must be used with the appropriate combination of stress tensor and normal vector if the deformations are not infinitesimal. The contact pressure variable is a '1st Piola-Kirchhoff type' quantity.

Regards,
Henrik
Hi, The contact pressure is a degree of freedom which is solved for (assuming that you are using the default augmented Lagrangian method). Please consult the theory section of the documentation for details. Using 'n dot Sigma dot n' will in principle give the same quantity, but with significantly less accuracy since it is derived from the stresses in the element. Also, note that the 'n dot Sigma dot n' formulation must be used with the appropriate combination of stress tensor and normal vector if the deformations are not infinitesimal. The contact pressure variable is a '1st Piola-Kirchhoff type' quantity. Regards, Henrik
Daniel Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17 mars 2015, 11:06 UTC−4
Henrik,

Thanks, and I appreciate it!

Best,

Daniel
Henrik, Thanks, and I appreciate it! Best, Daniel

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content