Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Time dependence issue
Posted 28 juin 2010, 21:08 UTC+2 1 Reply
Please login with a confirmed email address before reporting spam
Currently I am trying to model heat transfer of a stationary object to another stationary object. I have 2 temperature variables. I solve for the first T variable from time [0, 5000]. Then I want to use that Time stored solution, and insert into my other variable and solve that. When I do this variable T2 has no heat transfer. Any ideas why? I have attached my current model.
Thank you,
Evan
Thank you,
Evan
Attachments:
1 Reply Last Post 29 juin 2010, 09:23 UTC+2
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
it is not clear for me what you are trying to do, but normally if you have T and T2 you define where the two HT and HT2 are applied, and you set up the study sequence (by hand) by solving fisrt for T, store the solution, and then for T2, by setting the initial condition T2=T and link it to the previously stored solution
Hope this hels
Ivar
it is not clear for me what you are trying to do, but normally if you have T and T2 you define where the two HT and HT2 are applied, and you set up the study sequence (by hand) by solving fisrt for T, store the solution, and then for T2, by setting the initial condition T2=T and link it to the previously stored solution
Hope this hels
Ivar