Ressources
Livres Blancs
- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Finite Element Analysis of Thermal Fatigue in Thermal Barrier Coatings
Publié en 2009
A Finite element model of plasma sprayed TBC’s was developed to estimate the stress induced by thermal cycling experiments. A heat transfer analysis was performed to evaluate the temperature distribution on the specimen during the cooling under an impinging air jet; temperature measurements performed with an infrared pyrometer on the cooled samples show good agreement with the evaluated data. These results were then integrated in a structural mechanic model as thermal load. The COMSOL Multiphysics® Thermal-Structural interaction model allowed to determine the dependence of the stress on the temperature fields.

Téléchargement
- Borri_pres.pdf - 2.47MB
- Borri_1.zip - 1.64MB
- Borri.pdf - 0.22MB