Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Bridging the Terahertz Gap
Modeling the Lithium-Ion Battery
Protection contre la Corrosion
Modélisation des batteries
Modélisation et Simulation dans le développement des piles à combustible
Modélisation thermique des petits satellites
Analyse électro-vibroacoustique d'un transducteur à armature équilibrée

Model for Steam Reforming of Ethanol Using a Catalytic Wall Reactor

J. Torres[1], and D. Montane[2]
[1]Centre Huile Lourde Ouvert et Experimental (CHLOE), University of Pau, France
[2]Department of Chemical Engineering, Virgili University, Tarragona, Spain

Publié en 2008

Steam Reforming of Ethanol using a Catalytic Wall Reactor (CWR) was successfully studied using COMSOL Multiphysics. A mathematical model was used to describe the reactor performance in terms of the main variables and dimensionless groups.

Simulations showed that at specified conditions CWR maintains a thermal performance adequate for evaluating catalysts under a uniform temperature profile. CWR performance is mainly affected by mass flow rate and reaction kinetic parameters.

Téléchargement

Torres_pres.pdf - 0.51MB
Torres.pdf - 0.3MB