Articles techniques et présentations

In this paper, the effects of roughness in the surfaces of the plates caused due to nonuniform etching during their release and/or due to defects in the original wafer on the capacitance in RF-MEMS parallel plate varactors are analyzed. Capacitance extraction due to surface roughness has ... En savoir plus

A simple design for a microfluidic flow system for use in mixing or reacting assays with limited sample availability has been proposed and analyzed using COMSOL\'s multiphysics simulation package. The design is based on differential electroosmotic flow concept which has facilitated a ... En savoir plus

This paper presents finite element method (FEM) simulation study of the generation of bulk acoustic waves (BAWs) and their effect on the performance of surface acoustic wave (SAW) devices, using COMSOL Multiphysics. A SAW delay line structure using YZ-cut lithium niobate substrate is ... En savoir plus

In recent years, the single-sided linear induction motor (SLIM) has been the most suitable choice for electric vehicles of the wheel and touchless type. The reason is simplicity in manufacturing, capability in applying direct force, moving and braking and low pollution. To study the ... En savoir plus

Electrorefining is an electrolytic process for obtaining high purity metal. In this process the impure metal is made anode and the high purity metal is deposited on cathode. Electrorefining is a key step in pyrochemical reprocessing of spent fuel from metal fuel fast reactors. ... En savoir plus

A proximity DC current sensor using of a piezo sensed and actuated cantilever beam with a permanent magnet mounted at its free end is designed and simulated in COMSOL Multiphysics. The change in resonant frequency of cantilever is a measure of the current through the wire. The sensor is ... En savoir plus

Bread baking is a complex process where various physiochemical and biological transformations take place simultaneously. A two dimensional model was developed for the bread baking process taking into account of volume expansion, heat and mass transfer processes. Phase change and ... En savoir plus

We report the results of simulation showing light coupling in waveguides through prism coupling method. Prism coupling method of light coupling in waveguides is a dominant method adopted by photonic device fabricators. It is necessary to understand the effect various parameters on light ... En savoir plus

Porous Silicon (PS) can easily be formed by electrochemical etching of silicon in HF based electrolytes at room temperature. Since, PS is compatible with silicon IC technology; it finds lot of applications in the fabrication of MEMS devices. In the current study, we discuss the design of ... En savoir plus

High level radioactive waste (HLW) generated by nuclear fuel cycle is immobilized using glass melters. In Glass melters such as Joule Heated Ceramic Melter (JHCM) electrodes immersed in the glass generates heat by the joule heating due to electric current passing between electrodes ... En savoir plus