Articles techniques et présentations

Introduction: Flexures are low-cost bearings that are capable of providing motion guidance with high repeatability and low friction (Figure 1). However, applications of flexure bearings are often limited by their low range. This is because motion guidance in flexures is provided by ... En savoir plus

For the last two centuries, the conventional Fourier heat conduction equation has been used for modeling a diffusive nature of macroscale heat conduction by considering the energy conservation and Fourier's linear approximation of heat flux. However, it cannot accurately predict heat ... En savoir plus

Introduction: Glass relaxation occurs in a range of temperature during transition from equilibrium to super-cooled liquid. Viscoelastic material model can be applied to simulate glass behavior during the glass transition regime and to predict the glass deformation and stress evolution. ... En savoir plus

Uterine contractions during pregnancy are currently poorly understood – experts disagree on the mechanisms by which contractions propagate through the organ and the structural layout of the uterine muscle fibers. We have developed a multi-scale model of the uterus, at the cellular, ... En savoir plus

In welded tube manufacturing, the electric resistance welding (EW) process begins with a coiled plate of steel with appropriate thickness and width to conform the produced tube. The strip is pulled through a series of rollers that gradually cold conform it into a tubular shape. The edges ... En savoir plus

During the hydraulic fracturing process, there can be possible re-activation of closed/sealed faults and natural fractures in the formation, which may lead to changes in the boundary conditions of the reservoir. While study models of shale gas formations have utilized the concept of a ... En savoir plus

To reduce friction in lubricated tribological contacts, the surfaces of the contacting bodies can be microstructured to improve lubricating conditions. For lower loaded contacts this approach has already reached industrial applications, e.g. the piston-liner contact. For higher loaded ... En savoir plus

A three-dimensional mathematical model under stationary conditions have been established to understand the corrosion of carbon steel cylindrical samples immersed in flowing NaCl solution through an annular duct. The migration, diffusion and convection mass transfer mechanisms were solved ... En savoir plus

A novel propellant technology requires extruding two formulations with differential burning rates together as a multilayered propellant. This propellant is processed into a concentric cylinder configuration, in the form of slow-fast-slow with single perforation. The material uses ... En savoir plus

Oil and water are immiscible fluids and they tend to separate very easily when introduced into a flow stream from two different sources in a flow loop. This model studies the development of mixture volume fraction in an oil-water-flow loop with 3 different passive mixing schemes: (i) ... En savoir plus