- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
One of the most important criteria for evaluating chemical enhanced oil recovery (EOR) processes that use polymers is its rheological behaviour which in turn account for other physical effects of adsorption and resistance factors during polymer-rock interactions. However, complete ... En savoir plus
Spot laser welding is largely used in industrial manufacturing, especially in the case of small penetration depth. Unfortunately, welded joins are often polluted by porosities. The formation of porosities depends on complex thermo-hydraulic phenomena. During the interaction, a deep and ... En savoir plus
The current drive to go beyond the state of the art in novel near field scanning microwave microscope (NSMM) metrology at the micro scale, to make them capable of traceable measurements on functional materials, has led to the development of a finite element model of the probe of a ... En savoir plus
Internal combustion engine components have been a main research interest over many decades. The structural mechanics and dynamics of the piston rings has been a large focus of work in order to gain a greater understanding of the how the piston ring dynamics affect the piston ring. ... En savoir plus
Ultrasound Imaging probes are specific devices that require a very detailed design of acoustic impedance match for the stack of layers that form the probe head (1,3). These are typically made of silicone rubber, special epoxy resins, polyurethanes and, of course, piezoelectric ... En savoir plus
In one of the screw compressor system, designed silencer was not optimal. A great challenge was the large variation in operating conditions, especially the variation of the molecular weight of the gas. There was need to optimize the silencer. This paper describes the acoustic modelling ... En savoir plus
This work used the 3D CFD modeling to investigate non-uniform deactivation in packed bed reactors of low aspect ratios under steady state and dynamic operations. In order to explore the effects of condition of instability on local deactivation, detailed knowledge of flow dynamics (i.e. ... En savoir plus
The silicon is mainly known under its single-crystal shape and polycrystalline. Since a few decades, a new type of morphology is developed: the porous silicon (p-Si). Meso-porous silicon (Mp-Si) is one of promising materials for future microelectronic chips multi-functionalization ... En savoir plus
A mathematical model is developed for the stripping of CO2 from rich solvent. The rich solvent (aqueous NaOH) is used in CO2 absorption from natural gas through gas-liquid hollow fiber membrane contactor. The polyvinylidene fluoride (PVDF) hollow fiber membrane was fabricated via ... En savoir plus
The authors are currently investigating the use of bulk high temperature superconductors as trapped field magnets (TFMs) in order to increase the electrical and magnetic loading of an axial gap, trapped flux-type superconducting electric machine. In electric machines, the use of ... En savoir plus