Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

À la conférence COMSOL 2025, des ingénieurs, des chercheurs et des scientifiques du monde entier ont présenté leur utilisation de la modélisation et de la simulation dans tous les grands secteurs d'activité et dans le monde universitaire. Utilisez l'outil de recherche rapide pour trouver une présentation spécifique ou filtrez par sujet ou par lieu d'événement.

ISBN: 978-1-7364524-3-1

Terme recherché:

2014 - All

Improving Heating Uniformity of Dried Fruit in RF Treatments for Pest Control: Model Development and Validation

B. Alfaifi[1], J. Tang[2], Y. Jiao[2], S. Wang[3], B. Rasco[2], S. Jiao[2], S. Sablani[2]
[1]King Saud University, Riyadh, Saudi Arabia
[2]Washington State University, Pullman, WA, USA
[3]Northwest A&F University, Yangling, Shaanxi, China

Non-uniform heating is one of the most important challenges during the development of radio frequency (RF) heat treatments for pest control. A computer simulation model using finite element–based COMSOL Multiphysics® software was developed to investigate the heating uniformity of raisins ... En savoir plus

Full System Modeling and Validation of the Carbon Dioxide Removal Assembly

R. F. Coker[1], J. Knox[1]
[1]NASA Marshall Space Flight Center, Huntsville, AL, USA

The Atmosphere Revitalization Recovery and Environmental Monitoring (ARREM) project was initiated in September of 2011 as part of the Advanced Exploration Systems (AES) program. Under the ARREM project, testing of sub-scale and full-scale systems has been combined with multiphysics ... En savoir plus

Stochastic Diffusion of Calcium Ions Through a Nanopore in the Cell Membrane Created by Electroporation

O. Henao[1], V. Gómez[1], I. De La Pava[1], J. Sánchez [1]
[1]Grupo Fisiología Celular y Aplicada, Universidad Tecnológica de Pereira, Pereira, Risaralda, Colombia

We simulated the diffusion of calcium ions through a nanopore created in the cell membrane by electroporation, in presence and absence of the external electric field responsible of the membrane permeabilization. First we solved the set of coupled differential equations that describe the ... En savoir plus

Simulation of Normal and Cancerous T-cell Membrane Electroporation

O. Henao[1], V. Gómez[1], I. De la Pava[1], J. Sánchez[1]
[1]Grupo Fisiología Celular y Aplicada, Universidad Tecnológica de Pereira, Pereira, Risaralda, Colombia

Electroporation is an increase of the cell membrane permeability due to the formation of aqueous pores in it when the cell is under the influence of an intense electric field [1][2]. The formation of such pores in the membrane can be used to enhance the uptake of chemotherapeutic drugs ... En savoir plus

Digital Microfluidic Droplet Adapter for Interconnection of Biochips

R. Zhu[1], X. Xiong[2], P. Patra[1], C. Jin[1], J. Hu[3]
[1]Department of Biomedical Engineering, University of Bridgeport, Bridgeport, CT, USA
[2]Department of Electrical & Computer Engineering, University of Bridgeport, Bridgeport, CT, USA
[3]Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA

In this research, we use the COMSOL Multiphysics® software to design and simulate a digital microfluidic droplet adapter for board-level biochip integration. Digital Microfluidic Biochip (DMFB) has gained tremendous research interest in recent years due to its importance in Lab-on-a-Chip ... En savoir plus

Simulations of Heat and Mass Transport During Biomass Conversion Processes Using 3D Biomass Particle Models with Realistic Morphology and Resolved Microstructure

P. Ciesielski[1], M. Crowley[1], L. Thompson[1], B. Donohoe[1], D. Robichaud[2], A. Sanders[3], M. Nimlos[2], T. Foust[2]
[1]Biosciences Center, National Renewable Energy Laboratory, Golden, CO, USA
[2]National Bioenergy Center, National Renewable Energy Laboratory, Golden, CO, USA
[3]Quantum Electronics & Photonics Division, National Institute of Standards & Technology, Boulder, CO, USA

Predictive simulations of biomass conversion processes will improve their technical performance and reduce economic uncertainty surrounding industrialization of biofuels production. The majority of present conversion simulations treat the biomass feedstock with simplifying assumptions ... En savoir plus

Design of an Automated Thermal Cycler for Long-term Phase Change Material Phase Transition Stability Studies

D. Groulx[1], A. C. Kheirabadi[1]
[1]Mechanical Engineering, Dalhousie University, Halifax, NS, Canada

This paper highlights the use of the COMSOL Multiphysics® software during the design process of a thermal cycling system for regulated PCM phase transitioning. The primary purpose of the simulations was to predict the system behavior in response to an ON/OFF temperature control system ... En savoir plus

Delamination of Sub-Crustal Lithosphere

P. Vincent[1], E. Humphreys[2]
[1]College of Earth, Ocean, & Atmospheric Sciences, Oregon State University, Corvallis, OR, USA
[2]Department of Geological Sciences, University of Oregon, Eugene, OR, USA

Introduction: Lithospheric delamination beneath the western U.S. is believed to be the driving mechanism responsible for the evolution of magmatic and topographic features observed at the surface in the western U.S.. This process requires hot asthenosphere to be in contact with the ... En savoir plus

Generating Simulated Data for Spot Heating/IR Camera Analysis of Coal Slag Surfaces

M. Silva[1], T. Ring[1]
[1]Department of Chemical Engineering, University of Utah, Salt Lake City, UT, USA

For combustion simulations, the wall temperature and heat transfer is an important piece of information. Coal combustion systems typically have walls that are initially a cast ceramic, but, with time, slag is deposited on the surface and coal and soot are incorporated into the slag. It ... En savoir plus

Modeling and Simulation of Dual Application Capacitive MEMS Sensor

A. Ravi[1], R. Krishna[1], J. Christen[1]
[1]Arizona State University, Tempe, AZ, USA

Capacitive MEMS sensors offer high spatial resolution, sensitivity and good frequency response. In this paper, we present a circular membrane capacitive MEMS device that finds use both as capacitive micromachined ultrasonic transducer (CMUT) and pressure sensor. The MEMS device is first ... En savoir plus

Premier

311–320 of 503

Dernier

Articles techniques et présentations

Recherche rapide

COMSOL Conference 2025 Proceedings

Collection of Papers, Posters, and Slideshows Accepted by the Program Committee