- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
COMSOL Conference 2025 Proceedings
Recueil d'articles, de poster et de présentations acceptées par le Comité de programme
À la conférence COMSOL 2025, des ingénieurs, des chercheurs et des scientifiques du monde entier ont présenté leur utilisation de la modélisation et de la simulation dans tous les grands secteurs d'activité et dans le monde universitaire. Utilisez l'outil de recherche rapide pour trouver une présentation spécifique ou filtrez par sujet ou par lieu d'événement.
ISBN: 978-1-7364524-3-1
Plasma spraying is one of the prominent technologies for wear, corrosion and high temperature resistant coatings. The coating quality is very important to increase the performance of the components as well as to protect the outer surface of the component from external environment. The ... En savoir plus
This paper compares the efficiency of a vertical solar dryer vis-à-vis the traditional drying method by the means of a computer simulation. The said program considers geometric, thermal and mechanical effects so as to simulate heat transfer via conduction, convection and radiation. We ... En savoir plus
COMSOL Multiphysics® software is used to model a water tree in tape shield and concentric neutral cables. It allows for the effect on electric field intensity at the tip of the water tree and electric potential due to the water tree to be better understood. Also, COMSOL is used to ... En savoir plus
Spot laser welding is largely used in industrial manufacturing, especially in the case of small penetration depth. Unfortunately, welded joins are often polluted by porosities. The formation of porosities depends on complex thermo-hydraulic phenomena. During the interaction, a deep and ... En savoir plus
Microwave technology has provided with many exciting new therapeutic and diagnostic methods. Frequencies from RF as low as 400 kHz through microwave frequencies as high as 10 GHz are presently used for therapeutic applications in areas such as cardiology, urology, surgery, ophthalmology, ... En savoir plus
The current drive to go beyond the state of the art in novel near field scanning microwave microscope (NSMM) metrology at the micro scale, to make them capable of traceable measurements on functional materials, has led to the development of a finite element model of the probe of a ... En savoir plus
Internal combustion engine components have been a main research interest over many decades. The structural mechanics and dynamics of the piston rings has been a large focus of work in order to gain a greater understanding of the how the piston ring dynamics affect the piston ring. ... En savoir plus
This research studies the thermal effect of frozen pie heating in the microwave oven. Considering as composite material, the properties of pie derived based on its composition. Here the package, susceptor’s influence to the temperature distribution is also studied. En savoir plus
A 3D electro-conjugate heat transfer model was made to study an embedded microfluidic/TEG system (μF/TEG) system. An innovative embedded microfluidic/TEG system (μF/TEG) system is proposed which enables a device to be able to provide power to its cooling system eliminating external power ... En savoir plus
Ultrasound Imaging probes are specific devices that require a very detailed design of acoustic impedance match for the stack of layers that form the probe head (1,3). These are typically made of silicone rubber, special epoxy resins, polyurethanes and, of course, piezoelectric ... En savoir plus
