- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
COMSOL Conference 2025 Proceedings
Recueil d'articles, de poster et de présentations acceptées par le Comité de programme
À la conférence COMSOL 2025, des ingénieurs, des chercheurs et des scientifiques du monde entier ont présenté leur utilisation de la modélisation et de la simulation dans tous les grands secteurs d'activité et dans le monde universitaire. Utilisez l'outil de recherche rapide pour trouver une présentation spécifique ou filtrez par sujet ou par lieu d'événement.
ISBN: 978-1-7364524-3-1
Activated carbon filtration has proven to be a reliable method to clean indoor air. In such a system, air, contaminated with VOCs, is led through the filter where the contaminants are adsorbed onto the filter. However, for the long term stability of the air purification system, it is ... En savoir plus
Continuous Ink Jet (CIJ) printing technologies are widely used in the field of industrial coding and marking. These technologies are based on the emission of a high-speed jet of ink droplets (20 m/s) onto the surface of a moving medium. To maintain sufficient print quality, it is ... En savoir plus
The blast furnace shaft is a huge counter flow reactor in which heat and mass exchange play a significant role in its mathematical modelling. The heat exchange model is already available in COMSOL Multiphysics® via the Local Thermal Non-Equilibrium interface. This multiphysics coupling ... En savoir plus
In silico models can be exploited to predict cellular dynamics, such as resource uptake, migration and proliferation. Continuum modelling strategies such as finite element (FE) simulations are amongst the most common, but cannot exhaustively describe the metabolic consumption of cells, ... En savoir plus
This work, which is done in the framework of the SisAl Pilot EU project, presents the use of the COMSOL Multiphysics® software for simulating ladle furnace preheating. The SisAl Pilot project aims at optimising the silicon production in Europe by recycling materials and using a carbon ... En savoir plus
In metallurgy, the use of numerical models is popular because of the many coupled physical phenomena that occur during the various processes. For instance, the resulting shape and metallurgical state of a material are very sensitive to changes in temperature. The drop in temperature of ... En savoir plus
The thermal load on the system components is one of the technical problems in the development of microfocus X-ray tubes. To improve their stability in long-term use, it is important to understand the physical phenomena and their influence on the system stability and filament lifetime. To ... En savoir plus
Pumped two-phase cooling for improving thermal management of IGBT in rail transportation has been investigated both experimentally and numerically. The experimental study on pumped two-phase cold plate of IGBT used in HXD1C locomotives was conducted at a mass flow rate of 0.1 kg/s to 0 ... En savoir plus
