- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
COMSOL Conference 2025 Proceedings
Recueil d'articles, de poster et de présentations acceptées par le Comité de programme
À la conférence COMSOL 2025, des ingénieurs, des chercheurs et des scientifiques du monde entier ont présenté leur utilisation de la modélisation et de la simulation dans tous les grands secteurs d'activité et dans le monde universitaire. Utilisez l'outil de recherche rapide pour trouver une présentation spécifique ou filtrez par sujet ou par lieu d'événement.
*ISBN: *
A Solid Oxide Fuel Cell (SOFC) can convert the chemical energy of a fuel (H2-rich gas mixture [1] or syngas [2, 3] or biogas [4]) in electric and thermal energies with high electric efficiency. It is composed of two porous gas diffusion electrodes and an electrolyte (Figure 1). The fuel ... En savoir plus
The goal of this study is to exploit the phase change in vanadium dioxide (VO₂) for optical sensing. Infrared (IR) sensing is of paramount interest for next-generation Internet of Things (IoT) devices. Phase change materials (PCMs) are expected to enable low-energy consumption sensors, ... En savoir plus
Particle In Cell (PIC) simulation tool for the simulation of 2.45GHz ECR ion source was developed tanks to Comsol Multiphysics RF module capability to compute electromagnetic field propagation imposing a tensorial permittivity with real and complex parts. A tensorial description is ... En savoir plus
The process-induced deformation in the DED fabricated part is a critical issue to the scaling of the technology. Currently, an inefficient and expensive experiment trial-and-error approach is utilized to tackle this issue, however it is not feasible for large parts. Researchers have ... En savoir plus
Reflow soldering is a widely used technique in electronics manufacturing that facilitates the precise and automated assembly of electronic components onto printed circuit boards (PCBs). This method is indispensable for the efficient production of intricate electronic devices, ensuring ... En savoir plus
Due to the increase on the academic and industrial interest on thermal energy storage (TES) systems, the EU Horizon project HYSTORE is developing 4 different solutions. In these solutions, the use of thermochemical materials (TCM) and phase-change materials (PCM) are proposed. We ... En savoir plus
One way to extract piezoelectric material data from measurements is to utilize vibrational eigenmodes of block-shaped test specimens (Rupitsch 2015). Within a simulation-aided approach this results in optimizing the values of the material data parameters to fit the experimental result, ... En savoir plus
The aim of this work is to compute the mechanical forces in a 12-pulse converter transformer winding in different short-circuit modes. A 12-pulse converter transformer is a three phase transformer with two secondary windings whose tension have 30° phase displacement and one primary ... En savoir plus
