- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Plasma torches are essential components in high-temperature applications such as plasma gasification, where stable and focused energy delivery is critical for the efficient conversion of waste into syngas. A key challenge in these systems lies in understanding and optimizing the gas ... En savoir plus
Plasma, a complex fluid consisting of electrons, ions, neutrals, and excited species, exhibits both fluid-like behavior and electrical conductivity due to the presence of charge carriers. Consequently, computational modeling of plasma requires the integration of fluid and electrical ... En savoir plus
In 2016 the group of experimentalists from the Institute of High Current Electronics (Tomsk, Russian Federation) have been discovered a novel phenomenon related to atmospheric plasma jets that was called an “apokamp” (originated from Greek words “off the bend”). This new plasma jet ... En savoir plus
Atmospheric-pressure plasma jets (APPJ) are devices that generate chemically reactive species and operate at atmospheric pressure and ambient temperature for a wide range of applications. Plasmas jets produce charged particles (electrons and ions), neutral metastable species, radicals, ... En savoir plus
The current and energy transfer to cathodes of vacuum arcs usually occurs in bright, narrow regions, known as cathode spots. Owing to extreme conditions in these spots, the cathode surface is eroded: electrode material is vaporized, and craters and molten metal jets are formed. The study ... En savoir plus
Small-scale plasma jets in atmospheric air can produce regions of highly reactive chemistry coincident with temperatures approaching room temperature allowing his type of cold plasma jet to be used for decontamination of surfaces and sterilization of living tissue. In the device under ... En savoir plus
ICP reactors are usually meter sized and driven at RF frequencies, for example at 13.56 MHz. We developed a miniature resonator allowing an inductive type of coupling of microwaves at 2.45 GHz to a plasma jet, flowing in ceramic tubes. Previous experiments and simulations show an ... En savoir plus
The radio-frequency(RF) plasma sources have shown great potential in various industrial applications such as thin coatings deposition and polymers modification[1,2]. Physics of low pressure RF plasmas has been investigated significantly[3]; however, this kind of plasma source is rarely ... En savoir plus
In this paper, we present an interesting method to microfabricate a tilted micro air jet generator. We used the well-know Deep Reactive Ion Etching (DRIE) technique in order to realize in a silicon substrate a double side etching. For aircraft and cars, micro air jets will take an ... En savoir plus
High power Lower-Hybrid RF waves injected at in a Tokamak plasma can strongly modify the edge plasma. This is caused by ponderomotive forces pushing charged particles in an inhomogeneous oscillating electromagnetic field towards weaker field areas. On the Alcator C-Mod Tokamak, edge ... En savoir plus
