Consultez les proceedings de la Conference COMSOL 2020
Simulation and Verification of a Capacitive Proximity Sensor
State of the art proximity sensors are most often based on optical or tactile methods. Although these sensor systems are widely used (e.g. clamping protection) the reveal several drawbacks. Most optical sensors need a line of side whereas tactile sensors cannot be used to determine a ... En savoir plus
Current Distribution and Magnetic Fields in Complex Structures Using Comsol Multiphysics
The present paper presents numerical calculations of the magnetic fields and the current distribution within a wind turbine nacelle. The results are used by control system engineers designing panels and cables, who must ensure that the immunity of the equipment complies with the ... En savoir plus
On the Simulation of the Lightning Strikes to Complex Grounded Structures
There is a considerable world-wide interest among lightning protection engineers and designers on the improvement of the standard procedures to assess the location of the most vulnerable places on complex structures to be struck by lightning flashes. This paper presents the ... En savoir plus
Introduction to COMSOL based Modeling of Levitated Flywheel Rotor
This elaboration presents a pre-study on automatic rotor construction for the flywheel energy storage system dedicated to operate in the levitation mode. The optimization profile model is used as a basic profile source. The 3D flywheel shape is generated on the base of obtained ... En savoir plus
Analysis of a Three-phase Transformer Using COMSOL Multiphysics and a Virtual Reality Environment
The simulation software COMSOL Multiphysics is applied to the numerical com-putation of the magnetic fields of a three-phase transformer. A three-dimensional model of the geometrical configuration is created with the help of the CAD tools of COMSOL Multiphysics. There, all dimensions of ... En savoir plus
COMSOL Multiphysics Modelling for Measurement Device of Electrical Resistivity in Laboratory Test Cell
Bioreactor landfill is based on a homogeneous distribution of the moisture content to increase waste biodegradation. Most of studies have shown that Electrical Resistivity Tomography (ERT) can be a suitable method to study water content variation (2D and 3D). ERT is influenced by many ... En savoir plus
Designing Magnetic Coils from the Inside Out
Traditionally the design cycle for magnetic fields involves guessing at a reasonable conductor and magnetic material configuration, using finite element analysis (FEA) software to calculate the resulting field, modifying the configuration, and iterating to produce the desired results. We ... En savoir plus
Study on the Holding Characterestics of a Magnetic Gripper
Magnetic grippers are commonly used for workholding in handling and assembly of ferrous metalcasted parts. The workholding force produced by the magnetic gripper is strongly influenced by the texture and form of the workpiece in contact with its surface. This work explores the optimal ... En savoir plus
Using the Superposition Principle and Edge Current Model to Compute Impedance of the Coil in a Logging Tool
Coil antenna is the simplest form in well-logging tools for resistivity measurement of the formation. This paper introduces how to accurately compute the impedance of the coil with very thin wires at high frequency, and with the complex borehole structure, e.g., metal housing and ... En savoir plus
Modeling and Simulation of Artificial Core-Shell Based Nanodielectrics for Electrostatic Capacitors Applications
The need for high storage capacitors led to the development of polymer based capacitors. Polymers have high processability, mechanical flexibility, electrical breakdown strength and compatibility with printed circuit board (PCB) technologies; but usually have very low permittivity (K). ... En savoir plus