Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Batteries, Fuel Cells, and Electrochemical Processes

High-Temperature Sodium/Metal Chloride Storage Battery

M. Vallance[1], and R. White[2]
[1]General Electric Global Research Center, Niskayuna, NY, USA
[2]Department of Chemical Engineering, University of South Carolina, Columbia, SC, USA

Sodium/metal chloride storage batteries, used in hybrid propulsion applications, provide high energy and power densities safely and reliably. To understand the dynamics of electrochemical cycling, a high-temperature sodium/ferrous chloride storage cell was modeled in two dimensions. The ... En savoir plus

Simulation of C-MEMS Based Enzymatic Biofuel Cell

Y. Parikh, V. Penmatsa, J. Yang, and C. Wang

Department of Mechanical & Material Science Engineering, Florida International University, Miami, FL, USA

An Enzymatic Biofuel Cell (EBFC) converts the chemical energy in biological fuels into electricity. In this work, we optimize the performance of the Carbon-Micro Electro Mechanical system in an EBFC by using COMSOL Multiphysics. With a simple model, we realized that most of the glucose ... En savoir plus

Towards the Modeling of Microgalvanic Corrosion in Aluminum Alloys: the Choice of Boundary Conditions

N. Murer[1], N. Missert[2], and R. Bucchheit[1]

[1]Fontana Corrosion Center, Ohio State University, Columbus, OH, USA
[2]Sandia National Laboratories, Albuquerque, NM, USA

Aluminum alloys in near-neutral, mildly aggressive solutions, undergo damage accumulation during corrosion, mostly due to the presence of micrometer-sized constituent intermetallic particles (IMP) that create a microstructural discontinuity at which localized corrosion occurs. The ... En savoir plus

Modelling Coating Lifetime: First Practical Application for Coating Design

T. Machado Amorim [1], C. Allély[1], J. Caire[2]
[1]Arcelor Mittal Research, Maizieres-les-Metz, France
[2]ENSEEG, Grenoble, France

The corrosion at cut-made edges is significant due to the anode to cathode surface ratio in this region. The major problems are the risks of red rust appearance at the exposed steel surface, and the risks of paint delamination in case of insufficient corrosion protection. The work ... En savoir plus

Modeling Polybenzimidazole/Phosphoric Acid Membrane Behaviour in a HTPEM Fuel Cell

C. Siegel[1,2], G. Bandlamudi[1,2], and A. Heinzel[1,2]
[1]Zentrum für BrennstoffzellenTechnik (ZBT) gGmbH, Duisburg, Germany
[2]Institut für Energie- und Umweltverfahrenstechnik, University of Duisburg-Essen, Duisburg, Germany

Phosphoric acid doped polybenzimidazole (PBI) membranes are commonly used in today’s high-temperature polymer-electrolyte-membrane (HTPEM) fuel cell technology. COMSOL Multiphysics is used to model and simulate the three-dimensional, single-phase, non-isothermal overall cell behaviour ... En savoir plus

FEM Simulation of the Scanning Electrochemical Potential Microscopy (SECPM)

R. Hamou, P. Biedermann, M. Rohwerder, and A. Blumeneau
Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, Germany

The present work focuses on modeling a new experimental technique: Scanning Electro-chemical Potential Microscopy (SECPM), which is used to probe the potential profile of the electric double layer (EDL). We used an electrostatic approach to compute the EDL potential measured within the ... En savoir plus

Zinc Corrosion in a Crevice

C. Taxén, and D. Persson
Swerea-Kimab, Stockholm, Sweden

Corrosion of metals in confined zones is a big industrial problem. The electrochemistry of such localized corrosion processes is complicated by the impact of the corrosion processes on the composition of the local solution. In the present problem, local interaction with the atmosphere ... En savoir plus

Hybrid Multiscale Modeling of Corrosion Nanoinhibitors Transport

C. Trenado[1], D. Strauss[1,2], and M. Wittmar[2]
[1]Computational Diagnostics & Biocybernetics Unit, Saarland University Hospital, Homburg, Germany
[2]Leibniz-Institute for New Materials, Saarbrücken, Germany

Progress in coating technology has allowed for the development of free-chromate corrosion inhibitors, which are able to smartly migrate when required. In order to support the coating design, we propose a hybrid mathematical model to study the inhibitor's release by taking into account ... En savoir plus

Solid Oxide Fuel Cell Material Structure Grading in the Direction Normal to the Electrode/Electrolyte Interface Using COMSOL Multiphysics®

M. Andersson[1], B. Sundén[1]
[1]Department of Energy Sciences, Lund University, Lund, Sweden

Fuel cells (FCs) are promising as an energy producing device, which at this stage of development will require extensive analysis and benefit from numerical modeling at different time- and length scales. COMSOL Multiphysics® is used to describe an intermediate temperature solid oxide fuel ... En savoir plus

Numerical Results of Two 3D Coupled Models of a Unitary PEM Fuel Cell of 144cm²

E. Robalinho[1], E. F. Cunha[2], M. Linardi[2]
[1]Universidade Nove de Julho - UNINOVE, São Paulo, SP, Brazil
[2]IPEN/CNEN-SP, São Paulo, SP, Brazil

This computational implementation presents a new strategy of coupling two 3D models to satisfy the requirements of the comprehensive model of a unitary Proton Exchange Membrane fuel cell, including its internal geometries and constitutive materials, as well as distinct physical and ... En savoir plus

Premier

291–300 of 346

Dernier