Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Bioscience and Bioengineering

Finite Element Analysis Approach for Optimization of Enzyme Activity for Enzymatic Bio-fuel Cell

Y. Song, and C. Wang
Florida International University, Miami, FL, USA

Enzymatic biofuel cells (EBFCs) are miniature, implantable power sources, which use enzymes as catalysts to perform redox reaction with biological fuels such as glucose. In this study using COMSOL Multiphysics, we use an EBFC chip, having three dimensional, highly dense micro-electrode ... En savoir plus

3D-Simulation of Action Potential Propagation in a Squid Giant Axon

R. Appali[1], S. Petersen[1], J. Gimsa[2], and U. Rienen[1]
[1] Institute of General Electrical Engineering, Chair of Electromagnetic Field Theory, University of Rostock, Germany
[2] Institute of Biology, Chair of Biophysics, University of Rostock, Germany

Study of neurons plays a key role in the fields of basic and medical research aiming at the development of electrically active implants. The Fitzhugh-Nagumo equations are used to model and simulate the spike generation and propagation in a squid giant axon using COMSOL Multiphysics® 3.5a ... En savoir plus

Local Electroporation of Single Adherent Cells by Micro-Structured Needle Electrodes

K. K. Sriperumbudur[1], P. J. Koester[1], M. Stubbe[1], C. Tautorat[1], J. Held[2], W. Baumann[1], and J. Gimsa[1]
[1] University of Rostock, Chair of Biophysics, Gertrudenstr. 11a, 18057 Rostock, Germany
[2] Microsystem Material Laboratory, Department of Microsystems Engineering (IMTEK), University of Freiburg, Germany

In spite of its low throughput, Patch-Clamp is the established method for intracellular measurements of the transmembrane potential. To address this problem, we have developed new biosensor-chips with micro-structured needle electrodes (MNEs). MNE-penetration of single cells growing on ... En savoir plus

Full-Wave Simulation of an Optofluidic Transmission-Mode Biosensor

E. P. Furlani[1], N. M. Litchinitse[2], and R. Biswas[2]

[1]The Institute for Lasers, Photonics and Biophotonics, University at Buffalo, Buffalo, New York, USA
[2]Department of Electrical Engineering, The State University of New York at Buffalo,Buffalo, New York, USA

We present a study of an optofluidic biosensor. The sensor operates in a transmission mode wherein detection is based on a shift in the transmission spectrum caused by the contrast in refractive index between the carrier fluid and the target biomaterial. We study the behavior of the ... En savoir plus

An Efficient Finite Element Analysis on an RF Structure Used to Evaluate the Effect of Microwave Radiation on Uveal Melanoma Cells

A. Dulipovici[1], D. Roman[2], I. Stiharu[2], and V. Nerguizian[1]

[1]École de technologie supérieure, Montreal, Quebec, Canada
[2]Concordia University, Montreal, Quebec, Canada

The use of Microwave/RF energy on cancer cells is explored for tumor ablation using medium power level ranging between a few Watts to about 50 Watts. In this research, low power levels, less than 100 mWatt, are used to evaluate the effect of this energy on Uveal melanoma cells by ... En savoir plus

Bending of a Stented Atherosclerotic Artery

H.C. Wong[1], K.N. Cho[1], and W.C. Tang[1]

[1]Department of Biomedical Engineering, University of California, Irvine, California, USA

Atherosclerosis causes the deposition of plaque on the inner walls of arteries, which leads to restricted blood flow. Using the balloon angioplasty procedure, stents can be inserted and expanded in the atherosclerotic artery. We used COMSOL Multiphysics Structural Mechanics, Solid Stress ... En savoir plus

Image-based Simulation of Electrical Impedance Techniques Applied on the Human Thorax for Cardio-pulmonary Applications

A. Harkara[1], R.M. Heethaar[2], R.T. Cotton[1], and F.K. Hermans[2]

[1]Simpleware Ltd., Exeter, UK
[2]VU University Medical Center, Amsterdam, Netherlands

For medical diagnostic purposes there is an increasing need for non-(or minimal) invasive techniques to measure all kinds of parameters that can provide insight in the functioning of cells, organs or organ systems. Currently, Impedance Cardiography (ICG) is used for measurements of the ... En savoir plus

Finite Element Analysis of Microscale Luminescent Glucose Sensors in the Skin Dermis

S. Ali[1], and M. McShane[1]
[1]Department of Biomedical Engineering, Texas A&M University-College Station, Texas, USA

With the rising predominance of diabetes, successful management of blood glucose levels is increasingly important. Key efforts have focused on the development of optical microscale glucose sensing systems based on the encapsulation of glucose oxidase within microspheres coated with ... En savoir plus

Fluid Dynamics of Blood Flow during Reperfusion and Post-conditioning

T. Merrill[1], A. La Barck[1], and J. Docimo[2]
[1]Rowan University, Glassboro, New Jersey, USA
[2]FocalCool, LLC, Mullica Hill, New Jersey, USA

Reperfusion injury is caused by the rapid restoration of blood flow to oxygen-starved tissue. Animal studies show that intermittent periods of occlusion (also called post-conditioning) during reperfusion can limit tissue damage to vital organs such as the heart and brain. These studies ... En savoir plus

Modeling of Nerve Stimulation Thresholds and Their Dependence on Electrical Impedance with COMSOL

P. Krastev[1], and B. Tracey[1]
[1]Neurometrix, Inc., Waltham, Massachusetts, USA

Nerve localization is important for applications in regional anesthesia. Localization is achieved by stimulating the nerve with an electric field produced by a current from a needle inserted into the body of the patient, close to the target nerve. Modeling of the electric field in close ... En savoir plus

Premier

381–390 of 486

Dernier