- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Découvrez comment la simulation multiphysique contribue à faire progresser la recherche dans le monde entier grâce à des applications innovantes
La modélisation et la simulation multiphysiques stimulent l'innovation dans l'industrie et le monde universitaire, comme en témoignent les nombreuses applications présentées chaque année par des ingénieurs, des chercheurs et des scientifiques dans leurs articles techniques et posters lors des conférences COMSOL.
Inspirez-vous des travaux présentés lors des dernières conférences, rassemblés ci-dessous. Pour trouver une présentation en particulier ou affiner votre recherche par domaine d'application, année ou lieu de conférence, utilisez l'outil de recherche rapide.
Consultez les proceedings de la Conference COMSOL 2026
Introduction Droplet-based microfluidics is a large source of research for scientists of new biotechnologies, aerosols or other 2D-Microfluidics devices. Here, we will focus on an industrial application of a 3D microfluidic device : the PH2DG, Pneumo-HydroDynamic Droplet Generator. The ... En savoir plus
The dependency of electrochemical processes performances on mass transfer is well-known. Electrolyte flow in the vicinity of electrodes surface can enhance reactions due to increased mass transfer. This flow can be generated by the production of a gaseous phase, leading to a natural ... En savoir plus
Recently, due to the dynamically increasing complexity of modern systems, a strong necessity appears for more systematic approaches to high quality control and process monitoring. Requirements imposed by process control in the area of spatio-temporal physical systems also called ... En savoir plus
The use of microwaves for heating purposes of dielectric materials is encountered in many industrial applications (food processing, chemistry, material engineering and medical applications). In most of these thermal applications, the prediction of the temperature evolution within the ... En savoir plus
In the present work, numerical simulations of a Monolith Reactor (MR) are carried out in order to develop a pre-design tool for industrial-scale reactors applied to highly exothermal reactions. The reacting circular channels (2-4 mm internal diameter) are coated with a few micron thick ... En savoir plus
Heat transfer inside a refrigerated truck is a key phenomenon that governs the temperature inside the truck and the regulation of the cooling system. Up to now, a lot of experimental studies ([Tso et al., 02]) have been carried out to assess the effect of opening the door and to minimize ... En savoir plus
The groundwater flow is accompanied by the electric field with potential called usually the streaming potential or the Self-Potential (SP) to be measured on the ground surface (e.g., Rizzo et al., 2004; Bolève et al., 2007; Jardani et al., 2009). We studied numerically the SP signals ... En savoir plus
INTRODUCTION: Point-Of-Care (POC) and home care systems are of growing importance in biotechnological and medical applications [1]. These devices allow health monitoring directly at home or at the doctor’s office. Portability, low-cost, easy handling and compatibility with telemedicine ... En savoir plus
