Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Computational Fluid Dynamics

Simulations of Scanning Electrochemical Microscopy Experiments in Pure Negative and Positive Feedback Mode with Ring Microelectrodes

J. Mauzeroll[1], M. Mayoral[1], and D. Fabre[1]
[1]Department of Chemistry, Université du Québec à Montréal, Montreal, Quebec, Canada

Scanning electrochemical microscopy (SECM) is a powerful tool recently developed for studying structures and processes in micrometer and submicrometer sized systems. It can probe electron, ion, and molecule transfers, and other reactions at solid-liquid, and liquid-liquid, interfaces . ... En savoir plus

COMSOL Derived Universal Scaling Model For Low Reynolds Number Viscous Flow Through Microfabricated Pillars – Applications to Heat Pipe Technology

N. Srivastava[1], and C.D. Meinhart[1]
[1]Department of Mechanical Engineering, University of California Santa Barbara, Santa Barbara California, USA

Cooling of high-power density electronic devices remains a challenge. Microfluidic heat-pipes with the potential of achieving ultra-high thermal conductivities offer a low-cost technology for cooling electronics. To achieve high thermal conductivity, it is critical to maximize the rate ... En savoir plus

Studying Transition Flows for Low Prandtl Number Fluids

H. Jamai[1], A. Elamari[1], M. El Ganaoui[2], F.S. Oueslati[1], B. Pateyron [2], and H. Sammouda[3]
[1]LETTM, Département of physics, F.S.T, Tunisie
[2]SPCTS UMR CNRS, Faculte of Sciences, Limoges, France
[3]ESST-H., Sousse, Tunisie

COMSOL Multiphysics is offering an important alternative to home codes for modeling and simulation of complex problems with including coupled effects on heat and mass transfer. The present work focuses on low Prandtl number fluid melts subject to symmetry breaking and transition to ... En savoir plus

3-D COMSOL Analysis of Extruder Dies

E. Solomon[1] and V. Mathew[1]
[1]Arcada University of Applied Sciences, Espoo, Finland

Three-dimensional flow analysis was performed by using COMSOL Multiphysics Chemical Engineering Module for the purpose of analyzing the flow properties and finding out the operating points of a test domain. Using material property table for an exemplary melt of LDPE (Low-Density ... En savoir plus

Multiphysical Modeling of Calcium Carbonate Transportation in UV Disinfection in Water Treatment

E. R. Blatchley[1], and B.Z. Sun[1]
[1]Department of Civil Engineering, Purdue University, West Lafayette, IN, USA

Mineral precipitation on to the quartz surface of the lamp jackets in UV disinfection process (fouling) has been recognized as a major problem for UV radiation delivery during disinfection operation. Fouling behavior was observed to be induced thermally and influenced by hydraulic ... En savoir plus

Tilted Micro Air Jet for Flow Control

J. Malapert[1], R. Yahiaoui[1], R. Zeggari[1], and J-F. Manceau[1]
[1]Institut Femto-St, Université de Franche-Comté Besançon, France

In this paper, we present an interesting method to microfabricate a tilted micro air jet generator. We used the well-know Deep Reactive Ion Etching (DRIE) technique in order to realize in a silicon substrate a double side etching. For aircraft and cars, micro air jets will take an ... En savoir plus

Assessment of COMSOL Capabilities to Analyse the Thermo- Hydrodynamic Behaviour of the MSR Core

A. Cammi[1], V. Di Marcello[1], C. Fiorina[1], and L. Luzzi[1]

[1]Nuclear Engineering Division, Department of Energy, Politecnico di Milano, Milano, Italy

The present work is aimed at evaluating the capabilities of COMSOL Multiphysics® to treat heat transfer in Molten Salt Reactors (MSR). The analyzed situation is represented by the molten salt in turbulent regime flowing through a cylindrical channel surrounded by graphite, with both ... En savoir plus

Modeling of High-Temperature Ceramic Membranes for Oxygen Separation

J.M. Gozálvez-Zafrilla[1], J.M. Serra[2], and A. Santafé-Moros[1]

[1]Chemical and Nuclear Engineering Depart., Universidad Politécnica de Valencia, Valencia, Spain
[2]Instituto de Tecnología Química, Valencia, Spain

Oxygen transfer through ceramic membranes at high-temperature can substantially reduce costs respect to conventional separation methods. With the aim to improve the determination of the properties of the ceramic materials, a lab-scale permeation set-up was modeled using the Chemical ... En savoir plus

Large Scale Outdoor Flammable & Toxic Gas Dispersion Modelling in Industrial Environments

A. Hallgarth[1], A. Zayer[1], A. Gatward[2], and J. Davies[2]

[1]Hazard Research & Risk Consultants Ltd, Aberystwyth, Wales, United Kingdom
[2]Independent Consultants, United Kingdom

HazRes has developed a gas discharge and dispersion model in COMSOL which takes into account the effects of localized wind profiles and turbulence generated by buildings, structures and terrain on the dispersion of gases in question. The main focus of this work is to develop and provide ... En savoir plus

Fluid Flow Simulation of Preconcentration Membranes Using Finite Elements Tools

R. Inglés[1], J. Pallares[2], J.L. Ramirez[1], and E. Llobet[1]

[1]Dept. of Electronic, Electrical and Automatic Control Engineering, Universitat Rovira i Virgili, Tarragona, Spain
[2]Department of Mechanical Engineering School of Chemical
Engineering Universitat Rovira i Virgili, Tarragona, Spain

We use finite elements simulations in order to study the fluid flow behavior in a chamber of a preconcentrator. We realized that most part of the fluid does not affect our preconcentrator because it is going out the chamber at high distance above it and parallel to the preconcentrator. ... En savoir plus

Premier

891–900 of 1091

Dernier