Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Geophysics and Geomechanics

Evaluation of Instability of a Low-salinity Density-dependent Flow in a Porous Medium

Y. T. Habtemichael[1], R. T. Kiflemariam[2], H. R. Fuentes[1]
[1]Department of Civil & Environmental Engineering, Florida International University, Miami, FL, USA
[2]Department of Mechanical & Materials Engineering, Florida International University, Miami, FL, USA

Seawater intrusion into coastal aquifers is usually modeled by using transport models that include account for the effect of variable-density on flow. Variable-density models can be validated with the Henry and Elder benchmark problems. However, when mixed convective flow is simulated ... En savoir plus

The Effects of a Superparamagnetic Ground on the EMI Response of a Target

A. T. Clark[1]
[1]Research & Development, WM Robots LLC, Colmar, PA, USA

Soil’s electromagnetic properties adversely affect the performance of electromagnetic induction (EMI) sensors and if conditions are severe enough, render them useless. A simple circuit model is often used to express the electromagnetic induction response of a target analytically. This ... En savoir plus

Calibration of a Geothermal Energy Pile Model

R. Caulk[1], J. McCartney[2], E. Ghazanfari[1]
[1]University of Vermont, Burlington, VT, USA
[2]University of Colorado, Boulder, CO, USA

In this study, a model of in-situ geothermal energy piles was constructed using COMSOL Multiphysics® software. Geothermal energy piles serve two purposes, first to transfer building load into the subsurface, but also to extract thermal heat from surrounding soils. This is achieved using ... En savoir plus

Analysis of 1D, 2D, and 3D Marine CSEM in COMSOL Multiphysics® Software

E. C. Luz[1]
[1]Universidade Federal do Pará, Belém, PA, Brazil

The Marine Controlled Source ElectroMagnetic (marine CSEM) is a geophysical method used by the oil industry to investigate resistive targets in the sediments under the ocean floor. In this work we simulate marine CSEM data including 1D, 2.5D and 3D modeling. The results obtained with ... En savoir plus

Numerical Modeling of the Near-Subsurface Temperature Distributions in the Presence of Time Varying Air Temperature in the Boundary Condition and Space Varying Temperature for the Initial Condition

M. Ravi[1], D. V. Ramana[1], R. N. Singh[1]
[1]CSIR - National Geophysical Research Institute, Hyderabad, Telangana, India

The subsurface thermal structure in presence of groundwater recharge/discharge has been obtained by applying the Robin type boundary condition at the earth’s surface. The Robin type boundary condition involves the effect air temperatures at the surface which are taken as exponentially ... En savoir plus

2-Dimensional Incompressible and Compressible Mantle Convection

Changyeol Lee[1]
[1]Faculty of Earth and Environmental Sciences, Chonnam National University, Gwangju, Republic of Korea

COMSOL Multiphysics® software has been used in computational geodynamics for years. Because very high pressure in the mantle even significantly compressed the mantle up to ~40%, it is crucial to consider the mantle compressibility in computational geodynamics. COMSOL Multiphysics allows ... En savoir plus

Electromagnetic Well Logs Simulated with the COMSOL® RF Module on a Cluster

D. Swaminathan[1], G. Minerbo[1], K. Pathak[1]
[1]Drilling and Production Group, Schlumberger, Houston, TX, USA

Introduction Computer simulations are widely used for the interpretation and inversion of electromagnetic measurements in well logging. Until recently, simulated logs have been computed with approximate 1D or 2D models. By using the COMSOL® RF Module installed on a cluster, we show that ... En savoir plus

Pore-Level Influence of Contact Angle on Fluid Displacements in Porous Media

H. Ali Akhlaghi Amiri[1]
[1]University of Stavanger, Stavanger, Norway

Wettability affects two-phase displacements in porous media by determining the microscopic distribution of fluids in pore spaces. The impact of wettability on transport properties at macro-scales has been widely addressed in literature; however a deeper understanding of wettability ... En savoir plus

Energy Pile Simulation – an Application of THM-Modeling

E. Holzbecher[1]
[1]Georg-August University, Göttingen, Germany

Energy piles, i.e. heat exchangers located within the foundation piles of buildings, are used for heating of cooling purposes. Although the absolute values of deformations and temperature gradients are low or moderate, the entire setting can be influenced by thermo-hydro-mechanical ... En savoir plus

Simulation of Groundwater Flow Patterns around a Vertical Circulation Well

Y. Jin[1], E. Holzbecher[2], S. Ebneth[2], A. B. Tatomir[1]
[1]Department of Applied Geology, GZG, Georg-August- University of Göttingen, Göttingen, Germany
[2]Hölscher Wasserbau GmbH, Haren, Germany

Vertical circulation wells (VCWs) are well system consisting dual-screened sections allowing synchronous extraction and injection of groundwater in a single borehole. Vertical circulation flow or dipole flow is induced. This type of well has been widely used for in-situ remidiation, ... En savoir plus

Premier

271–280 of 297

Dernier