- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Simulative Development of a Convectively Cooled Heat Sink for a Heat Pipe Mould-Element Corresponding Author: mhuettemann@fh-bielefeld.de The FH Bielefeld has developed an injection mold in which a lateral slide is tempered by heat pipes instead of conventional cooling channels. The ... En savoir plus
The main drawbacks of the desalination technologies are the high energy requirement and the environmental issue related to both the brine discharge and the energy sources exploited. Thus, passive desalination is considered the most suitable expedient to address these issues and to ... En savoir plus
Photovoltaic-powered electrolysis (PV-EC) though the most mature technology for zero-carbon integrated solar to hydrogen conversion, is still only approaching industrial and commercial relevance, and devices with light absorber area larger than 100 cm2 are quite rare [1,2]. Here, we ... En savoir plus
In order to optimize the industrial “ammunition cooling” process, a COMSOL Multiphysics® model is proposed. A shell body filled with a melt-cast explosive formulation is poured and cooled by circulation of a heat transfer fluid. The solidification of the explosive composition has several ... En savoir plus
High-Temperature Superconductors (HTS) can be superconducting in liquid nitrogen (77 K), holding immense promises for our future. They could enable disruptive technologies such as nuclear fusion and power applications. In a power system, for instance, high short-circuit currents can ... En savoir plus
ALD Vacuum Technologies GmbH has been using COMSOL Multiphysics® since 2020. Our machines use an electron beam system to provide the required process heat. Multiple physical aspects of this electron beam system are simulated in COMSOL Multiphysics®. Strong alternating currents run ... En savoir plus
Introduction Over the last years, there has been an increasing interest in plastic recycling as an alternative to reduce fossil fuel dependency. In this light, chemical recycling has been presented as a promising strategy to maximise the recycling rate, although this technology presents ... En savoir plus
Heat management has became a bottleneck in electronic engineering because of the large amount of energy released by current devices due to its extreme level of miniaturization [1]. This is a very important limitation to achieve, for example, terahertz clock-rates in computing and it is ... En savoir plus
