Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Computational Fluid Dynamics Approach to Evaluate Electrostatic Precipitator Performance

M. Ahmadi [1]
[1] Faculty of Engineering Technology, University of Twente, Enschede, The Netherlands

Electrostatic precipitation is an extremely efficient way of filtering fine particles from the airstream. Electrostatic precipitators (ESPs) can control airborne emission without significantly slowing down the rate of flow, because of the low pressure drop across this type of filters. A ... En savoir plus

Radiofrequency Ablation and Its Effect on Heat Generation on Ground Pads

J. J. Barrett [1], M. Brown [1,][2],
[1] Halyard Health, Alpharetta, GA, USA
[2] Georgia Institute of Technology, Atlanta, GA, USA

Radiofrequency ablation (RFA) is a minimally invasive procedure that can be used to treat chronic pain. Radiofrequency (RF) energy is emitted through a probe that is placed near a sensory nerve in the region of pain. The RF energy excites the nearby ions in the tissue causing them to ... En savoir plus

Inverse Analysis of Soil Parameters Based on Deformation of a Bank Protection Structure

Y. Xing [1], R. Hu [2], Q. Liu [1],
[1] Geoscience Centre, University of Goettingen, Goettingen, Germany
[2] School of Earth Science and Engineering, Hohai University, Nanjing, China

Deformation prediction is an important part of the structure stability analysis. However, the deformation of bank protection structure which is affected by many factors, such as structural stiffness, earth pressure and hydrostatic pressure. It contains a complex mechanical process, which ... En savoir plus

Multiphysics Simulation of Micro-Thermoelectric Generators Based on Power Factor Optimized Materials

V. Barati [1], H. Reith [1], G. Li [1], D. A. Lara Ramos [1], G. Schierning [1], K. Nielsch [1],
[1] Leibniz Institute for Solid State and Material Research, Dresden, Germany

Thermoelectric generators (TEGs) which convert heat into electrical energy due to Seebeck effect, have recently attracted a great attention as green and sustainable energy sources. One of the challenges in the field of thermoelectric devices is the design optimization in order to make ... En savoir plus

Polynomial-Chaos Uncertainty Modeling in Eddy-Current Inspection of Cracks

T. T. Zygiridis [1], A. E. Kyrgiazoglou [2], T. P. Theodoulidis [2],
[1] Department of Informatics and Telecommunications Engineering, University of Western Macedonia, Kozani, Greece
[2] Department of Mechanical Engineering, University of Western Macedonia, Kozani, Greece

In the context of non-destructive evaluation methods, eddy-current testing plays a prominent role in crack-detection problems, due to its various attractive features. One of the physical quantities that typically interest us in such type of problems is the – complex – coil impedance and ... En savoir plus

Computational Study on Transcutaneous Frontal Nerve Stimulation: Simplification of Human Head Model

E. Salkim [1], A. N. Shiraz [1], A. Demosthenous [1],
[1] Electronic and Electrical Department, University College London, London, UK

I. INTRODUCTION Migraine is a neurological disorder which affects nearly 15% of the population and it has been estimated that the European Community spends about €27 billion in a year. Its symptoms may be categorized as attacks of often severe, throbbing head pain with sensory ... En savoir plus

Numerical Simulation of PCB-Coil-Layouts for Inductive Energy Transfer Systems

D. Maier [1], N. Lucht [1], A. Enssle [1], A. Lusiewicz [1], J. Fischer [1], U. Pecha[1], N. Parspour [1]
[1] Stuttgart University, Institute of Electrical Energy Conversion, Stuttgart, Germany

This paper presents the two dimensional (2D) Finite Element Method (FEM) COMSOL Multiphysics® model of a PCB-Coil layout. The model comprises of different coil layouts for sake of comparison. The scientific goal of the simulation is to find an optimized arrangement with a high quality ... En savoir plus

Numerical Calculation of the Three Dimensional Inter-Bar Current Distribution in Induction Machines

J. Güdelhöfer [1], R. Gottkehaskamp [1], A. Möckel [2],
[1] University of Applied Sciences Düsseldorf, Düsseldorf, Germany
[2] Technical University of Ilmenau, Ilmenau, Germany

The calculation of additional losses in induction machines is a challenging task. In skewed motors, a part of these losses is connected to the phenomena of inter-bar currents. Inter-bar currents flow between adjacent bars through the rotor lamination. Since they are aligned perpendicular ... En savoir plus

CMOS Based Atom Chips for Sensor Applications

Ph. Neuman [1], A. Nemecek [1], C. Koller [2]
[1] Department for Micro-and Nanosystems, University of Applied Sciences Wiener Neustadt, Austria
[2] Department for Micro-and Nanosystems, University of Applied Sciences Wiener Neustadt, Austria, and School of Physics and Astronomy, University of Nottingham, Nottingham, UK

Ultra-cold atomic systems have proven over the last decade to be a excellent platform for the realization of quantum sensors, quantum computation or quantum simulation applications. A special implementation of this technology is the so called atom chip, where the magnetic fields ... En savoir plus

Multiphysical Simulation of Moved Data Cable

M. Raum [1]
[1] Friedrich-Alexander Universität, Erlangen, BY, Germany

In general this thesis is about the effects of mechanical stress on data cables in moved applications. If a data cable is loaded with different kind of forces and used within high frequency applications it is possible, that the geometrical changes may have an impact on the electrical ... En savoir plus

Premier

1081–1090 of 1762

Dernier