- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
In the model silicon nanorods are designed as cantilever array and coated with thin film of aluminum or aluminum nitride, to be characterized, thus, adding a detectable mass and altering the cantilever resistance to bending. The simulated results show that when films of different ... En savoir plus
Designing a component with multiple functions, e.g. load bearing and noise attenuation, can increase the effectiveness of each component and reduce the complexity of the overall system, thereby improving system efficiency as well. Current multifunctional components include metal foam. ... En savoir plus
Magnetorheological Finishing (MRF) is one of the precision finishing processes in which magnetic field is used to drive abrading forces for Finishing 2D and complex 3D surfaces. In this paper, Ball End Magnetorheological Finishing (BEMRF) has been analyzed for fluid behaviors under the ... En savoir plus
We report a numerical study on the blood – magnetic carrier aggregate flow in an external magnetic field, for applications such as magnetic drug targeting. The arterial system morphology is complex and patient-related therefore more realistic numerical simulations request medical image ... En savoir plus
Vibration and Dynamic performances of the rotating machinery are conventionally evaluated based on the dominant structural forces such as the centrifugal forces. The increase in rotational speed, miniaturization and performance, demands for improved and accurate evaluation of the ... En savoir plus
Cross-flow around a group of cylinders is a very common phenomenon in engineering, such as flow around heat exchanger tube arrays. The cross-flow-induced vibration might cause a reduction of equipment life and might even lead to the occurrence of severe accidents. Hence, it is necessary ... En savoir plus
Atherosclerosis is a disease that narrows, thickens, hardens and restructures a blood vessel due to substantial plaque deposit. In the Carotid Artery, the decision to treat using endarterectomy and stenting is determined by the velocity as measured by Doppler flow in the common Carotid ... En savoir plus
Ar/H2 discharges are frequently used in various industrial applications, such as etching processes, surface treatment, and film deposition. In the discharges, the active species, such as ions and hydrogen atoms, are responsible for surface reactions, which could be considered as the ... En savoir plus
The current general context for green production and decarbonation prompts considering alternative solutions to produce high added value byproducts from gas decomposition without producing CO2. Steam Reforming or Combustion processes, widely applied in Industry, need H2O or O2 to ... En savoir plus
Condenser microphones will have an electrical output for any displacement of the membrane relative to the back plate, which is usually bound to the microphone housing. For the typical use case, a pressure input will create a pressure difference across the membrane, which causes a ... En savoir plus