- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
The AC losses that superconducting magnet systems experience during transient events are an important design consideration in fusion reactors. We present results on the approach for calculating AC losses in the high temperature superconducting (HTS) toroidal field (TF) magnets of the ... En savoir plus
A contactless electromagnetic principle for the excitation of mechanical vibrations in resonant structures has been investigated. The principle relies on no specific magnetic property of the resonator except electrical conductivity and can be adopted for employing the structures as ... En savoir plus
This paper describes consecutive stages of design and construction of electromagnetic gun manufactured at the Silesian University of Technology. It gives insight into current knowledge about such a launcher. The computer model was elaborated in COMSOL Multiphysics version 3.5. The ... En savoir plus
The aim of this article is to demonstrate the capability of the software for predicting free-surface motion and internal fluid flow in an electromagnetically levitated sample of liquid metal. Multiphysics solutions which demonstrate the usefulness of Comsol as a powerful MHD simulation ... En savoir plus
Introduction Computer simulations are widely used for the interpretation and inversion of electromagnetic measurements in well logging. Until recently, simulated logs have been computed with approximate 1D or 2D models. By using the COMSOL® RF Module installed on a cluster, we show that ... En savoir plus
Examples of Electromagnetic processes are presented: (1) cold crucible, (2) electromagnetic pump, (3) DC electromagnetic brake. A combined approach by using multiphysics modeling with Comsol and experimental validation is used in order to give some guidelines for process improvement and ... En savoir plus
The high-temperature superconducting magnet (HTS) is one of the core technologies of a superconducting maglev. The effects of multiphysics fields including electromagnetic, mechanical, and thermal should be taken into consideration in design. Traditional design methods rely on the ... En savoir plus
INTRODUCTION The global energy infrastructure is comprised of a variety of power magnetic devices (PMDs) which include motors, generators, transformers, inductors, actuators, relays, etc. In the field of power engineering, and particularly in the design of PMDs, modern advances are ... En savoir plus
Simulating the shielding of a 3T-magnetic field with superconducting NbTi and BSCCO tubes deploying the A-H field formulation using COMSOL Multiphysics Screening of electromagnetic fields is a crucial technique for areas such as telecommunications, medical imaging, data storage and for ... En savoir plus
Electromagnetic actuators are representing one important component of ABB's medium voltage reclosers [1, 2]. Their performance is strongly influenced by the considered material properties as well as by the electronic control units that will power the actuator. Depending on the studied ... En savoir plus