Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

The Campi Flegrei Deep Drilling Project ‘CFDDP’: Understanding the Magma-water Interplay at Large Calderas

G. De Natale[1], G. Perillo[2], C. Troise[1], and P. Gasparini[3]
[1]INGV-Osservatorio Vesuviano, Naples, Italy
[2]Università degli Studi di Napoli Parthenope, Naples, Italy
[3]AMRA scarl, Naples, Italy

Campi Flegrei caldera is a good example of the most explosive volcanism on the Earth, a potential source of global catastrophes. It has the advantage that the most interesting structural details and main volcanic features appear located at shallower depth, making it a natural candidate ... En savoir plus

Towards Rotordynamic Analysis with COMSOL Multiphysics

M. Karlsson[1]
[1]ÅF, Stockholm, Sweden

In this paper a pre-study on using COMSOL Multiphysics for rotordynamic analysis is presented. It is concluded that it is possible to use COMSOL Multiphysics to perform rotordynamical analysis. However, there are no standard environment for rotordynamics, hence the user has to extend the ... En savoir plus

Multiphase Porous Media Model for Microwave Drying Spherical Potatoes

H. Zhu[1], T. Gulati[2], K. Huang[1], A.K. Datta[2]
[1]Sichuan University, Chengdu, Sichuan, China
[2]Cornell University, Ithaca, NY, USA

Mathematical description of microwave drying requires the solution of two different physics: electromagnetics in the microwave oven cavity and food material and, transport process (mass, momentum and heat transport) in the food material. Maxwell’s equations for electromagnetics were ... En savoir plus

Design Of Acoustic Metamaterials Based On The Concept Of Dual Transmission Line

A-S.Moreau[1], H.Lissek[1], and F. Bongard[2]
[1]Ecole Polytechnique Fédérale de Lausanne, Switzerland
[2]JAST SA, Antenna Systems, Lausanne, Switzerland

In this context, a one-dimensional acoustic transmission line, exhibiting metamaterial properties, is presented. It is composed of an acoustic waveguide, periodically loaded with membranes having the function of series capacitances, as well as transversally connected open channels ... En savoir plus

Annealing Furnaces Modelisation for Photovoltaïc Applications

J. Givernaud[1]
[1]EMIX, St Maurice La Souterraine, France

The optimisation of dimensions, materials choice of heaters in annealing furnaces are done with COMSOL Multiphysics® in 2D-axisymetry. Heat losses sources are identified and corrective actions can be taken in function of simulation results. A power saving of more than 50% is achieved ... En savoir plus

The Full-System Approach for Elastohydrodynamic Lubrication

N. Fillot[1], T. Doki-Thonon[1], and W. Habchi[2]
[1]CNRS, INSA, Université de Lyon, Lyon, France
[2]Department of Industrial and Mechanical Engineering, Lebanese American University, Byblos, Lebanon

A ball is in contact with a plane, and a lubricant separates the two surfaces to decrease friction during their relative motion. To avoid wear, the lubricant film thickness should be higher than the surface roughness. The goal of this paper is to show how it is possible to solve ... En savoir plus

Modelization of Photoacoustic Trace Gases Sensors

B. Parvitte[1], C. Risser[1], R. Vallon[1], V. Zéninari[1]
[1]GSMA - Université de Reims, Reims, France

This paper aims to demonstrate the simulation of photoacoustic signals using FEM software. The Acoustics Module of the software COMSOL Multiphysics is used to calculate the response of a differential Helmholtz resonator cell. In a second part a preliminary result obtained with the ... En savoir plus

Numerical Simulation of Oil Recovery by Polymer Injection using COMSOL

J. Wegner[1], L. Ganzer[1]
[1]Clausthal University of Technology, Clausthal, Germany

In this paper we used COMSOL Multiphysics to model basic physico-chemical effects relevant in polymer enhanced oil recovery (EOR) such as non-Newtonian rheology of the displacing phase, permeability reduction, adsorption and salinity effects. COMSOL\'s PDE interface as well as Species ... En savoir plus

Quench Propagation and Detection in a YBCO Racetrack

G. Escamez[1], C. Lorin[1], T. Wu[1], P. J. Masson[1]
[1]University of Houston, Houston, TX, USA

High temperature superconductors (HTS) such as YBCO coated conductors show great promise for future applications where high magnetic fields are needed. The superconducting state only exists under a critical surface defined in the (J,T,B) space. Quench is the process by which a current ... En savoir plus

Multiphysics FEM Simulations Approach for Development of a MEMS Heat Generator

G. S. Masi[1], S. V. De Guido[1], G. Montagna[2], C. Martucci[2], P. M. Congedo[1], L. Vasanelli [1], M. G. Manera[2], R. Rella[2]
[1]Department of Innovation Engineering, University of Salento, Lecce, Italy
[2]CNR-IMM, Lecce, Italy

Introduction: Accurate fluid temperature control in microfluidic channels is a requirement for many lab-on-chip and micro-reactors.Thin films resistive metal heaters have proven to be the best choice for localizing heating applications with integrated microfluidic systems. A thin ... En savoir plus

Premier

1281–1290 of 1392

Dernier