- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
In a recent publication (Limitations of Breakthrough Curve Analysis in Fixed-Bed Adsorption, Ind. Eng. Chem. Res. 2016, 55, 4734-4748) the authors discussed the a priori prediction of the axial dispersion coefficient from available correlations versus obtaining it and also mass transfer ... En savoir plus
SOFC is a high temperature electrochemical device known for its fuel flexibility. Apart from using pure hydrogen, it can utilize CO (carbon monoxide), CH4 (methane) or any other higher hydrocarbon. Since methane is highly researched hydrocarbon fuel, it was chosen to start with. The most ... En savoir plus
In this study, a 2-D model has been built using COMSOL Multiphysics® to analyze a triple coupled physics problem involving simultaneous gas diffusion, heat transfer, and structural mechanics in a pipe due to the flow of high-pressure carbon dioxide. The problem geometry and boundary ... En savoir plus
A numerical analysis on transient three-dimensional temperature distribution in a semi-infinite solid, irradiated by a moving Gaussian laser beam, is carried out numerically by means of the code COMSOL Multiphysics. The investigated workpiece is simply a solid. A laser source is ... En savoir plus
A TAP reactor is a fixed-bed catalytic reactor operated in pulse (transient) mode under very low pressures. It has become a very important tool in catalytic studies as it fills the material and pressure gaps existing between practical conditions and high vacuum – monocrystal techniques. ... En savoir plus
Steam Reforming of Ethanol using a Catalytic Wall Reactor (CWR) was successfully studied using COMSOL Multiphysics. A mathematical model was used to describe the reactor performance in terms of the main variables and dimensionless groups. Simulations showed that at specified conditions ... En savoir plus
A common pyrometallurgical route for the recovery of numerous metals and rare earths is high-temperature molten salt electrolysis. This process involves an electrolyte made of a molten salt in which the metal to be recovered, most commonly present in its oxide form, is dissolved. When a ... En savoir plus
The search for energy saving is nowadays mandatory because of the constant growth of CO2 emissions caused by an inefficient energy management. Thermal Energy Storage (TES) has an important role in designing of energy efficient systems, including solar energy storage (daily or seasonal) ... En savoir plus
A fast, high-sensitivity detector is required for studies of environmentally relevant gases. Photoacoustic spectroscopy (PAS), an absorption spectroscopy technique in which absorption is detected as sound, is explored as a possible solution. A tuning-fork based PAS sensor is modeled ... En savoir plus
A comprehensive mathematical model that includes mass and heat transfer was developed for the transport of gas mixture of carbon dioxide and methane through hollow fiber membrane (HFM) contactor. COMSOL Multiphysics® was used in solving the set of partial, ordinary and algebraic ... En savoir plus