- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
In this paper we present a transient numerical model of the heat transfer and thermochemical damage evolution in an IR translucent material using COMSOL Multiphysics. The model is evaluated using literature supplied and experimentally determined material properties for carbon black laden ... En savoir plus
锂离子电池在便携式电子设备领域占据主导地位，并显著推动了电动汽车的商业化进程。当前全球研发重点集中于开发具有高能量密度、快速充放电能力、高功率输出、低成本及高安全性的电池系统。在材料选择中，机械强度的耐久性与长周期循环的结构完整性成为关键评价指标。锂离子电池内部存在显著的电化学-力学耦合行为，表现为大变形、塑性流动、裂纹扩展与疲劳等现象，进而引起电极剥离、孔隙闭合以及副反应加速等多种失效模式。其中，正极颗粒的破裂等力学-电化学退化机制是限制锂离子电池性能的主要因素之一，因此深入研究正极材料在多场耦合条件下的响应机制，对实现下一代高能量密度电池至关重要。 钴酸锂 ... En savoir plus
Nowadays, spot laser welding is a full-fledged part of industrial manufacturing and is routinely used due to its advantages. It generates very located temperature gradients, and therefore, induces small distortions in the pieces. The COMSOL Multiphysics® software is used to model the ... En savoir plus
Matrix Assisted Pulsed Laser Evaporation (MAPLE) technique is used for the deposition of high quality biocompatible polymer thin films. During the deposition process the temperature of the laser target should be kept below 193K to assure the proper quality of both evaporation and ... En savoir plus
The application of an oscillating magnetic field on the high-power full-penetration laser beam welding process of a 20 mm thick stainless steel plate was numerically and experimentally investigated. In the simulations, three-dimensional heat transfer and fluid dynamics as well as ... En savoir plus
Quantum Dots (QDs) laser is expected to have a low threshold current density and high thermal stability. We propose the QDs laser with the half-etched mesa distributed feedback (HEM DFB) structure. We accurately calculated the coupling coefficient in a HEM waveguide using the finite ... En savoir plus
For a better understanding of phenomena associated to the appearance of defects in laser welding, a heat and fluid flow model is developed. This study is focused on the modeling of a static laser shot on a sample of steel. This 2D axialsymmetric configuration is used to study phenomena ... En savoir plus
Laser interstitial thermotherapy (LITT) is a cancer treatment technique in which laser fibers are introduced inside the tumor. While it destroys deep tumors, the LITT procedure allows minimizing the impact on adjacent healthy structures. One of the effective methods to perform treatment ... En savoir plus
A time-dependent COMSOL Multiphysics model of an additive manufacture process, which uses powder consolidation by laser heating was developed, providing a platform to better understanding the manufacture process & provide a tool to reduce resulting distortion & optimization of an ... En savoir plus
Magnetized target fusion (MTF) is a promising approach to achieve fusion conditions that relies on the heating of a magnetized plasma by the rapid compression of a magnetic flux conserver. The compression timescale must be significantly shorter than the plasma’s thermal confinement time, ... En savoir plus