Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Investigation on an Encircling Pulsed Eddy Current Probe Performance Using COMSOL Multiphysics®

S. Majidnia[1], R. Nilavalan[1], J. Rudlin[2]
[1]Brunel University, London, United Kingdom
[2]TWI ltd, Cambridge, United Kingdom

Conventional eddy current techniques have been used to a great extent for detection of surface breaking defects in conductive materials. However, detection of sub-surface defects is limited due to the single frequency and skin effect phenomena. Pulsed Eddy Current (PEC) techniques ... En savoir plus

Effect of Area of the Reaction Surface on the Capture Efficiency of Immunosensors

D. Rath [1], S. Panda [1],
[1] Indian Institute of Technology, Kanpur, India

With the progress of immunosensing technology, the detection of diseases at early stages is feasible using surface based heterogeneous immunosensors [1]. Literature contains few reports where it is verified that reaction spot of smaller size leads to high fractional occupancy of targets, ... En savoir plus

Design and Simulation of Underwater Acoustic MEMS sensor

S. Prabhu [1], Nagbhushan [1],
[1] Nitte Meenakshi Institute of Technology, Bengaluru, Karnataka, India

Silicon based MEMS have wide applications in under water sensors. This work aims one such applications, hydrophone. Hydrophone detects the pressure variations of acoustic signals and noise in the water and produces an output voltage proportional to the pressure. Here the attempt is made ... En savoir plus

A Broadband THz Cutline Metamaterial Absorber

P. Deshmukh [1], B. R. Sangala [1], G. Rana [2], S. S. Prabhu [1],
[1] Tata Institute of Fundamental Research, Mumbai,India
[2] Indian Institute of Technology Bombay, Mumbai, India

We demonstrate a broadband metamaterial (MM) absorber for THz frequencies. The MM was characterized in the spectral region of 0.3 - 3 THz with THz Time domain spectroscopy (TDS) using 1 mm ZnTe crystal for Electro-optic detection. A strong broadband resonance is observed, centered around ... En savoir plus

Finite Element Analysis of Planar Microcoil Based Induction-balance Magnetic MEMS Sensor

Krishnapriya S¹, Suja K J², Rama Komaragiri³
¹Department of ECE. Muthoot Institute of Technology, India
²NIT Calicut, Calicut, Kerala India
³Bennett University, Greater Noida, Uttar Pradesh, India

Two transmitting planar microcoils (TX1, TX2) and one receiving microcoil (RX) are employed as shown in Fig.1 formed in induction-balance configuration. RX-Coil is positioned in such a way to achieve primary field suppression in RX-Coil’s region. Meaning, a magnetic cavity is created in ... En savoir plus

Enhancing Fluorescence of Diamond Color Centers near Gold Nanorods via Geometry Optimization

M. Csete [1], A. Szenes [1], L. Zs. Szabó [1], G. Szabó [1], T. Csendes [2], B. Bánhelyi [2],
[1] Department of Optics and Quantum Electronics, University of Szeged, Szeged, Hungary
[2] Institute of Informatics, University of Szeged, Szeged, Hungary

Detecting light emitted by fluorescent molecules with resolution down to single photon is an important problem in various fields of sciences and applications, such as solid-state physics, quantum information processing and medicine. The detection probability can be improved via ... En savoir plus

Thermal Simulation and Package Investigation of Wireless Gas Sensors

A. Paoli[1], L. Seminara[2], D.D. Caviglia[1], A. Garibbo[2], and M. Valle[1]

[1]Department of Biophysical and Electronic Engineering, University of Genova, Genova, Italy
[2]SELEX Communications S.p.A., Genova, Italy

Gas sensor arrays based on metal oxides operating at high temperature are commonly used in many application fields. They can operate on different principles and each sensor may show very different responses to the individual gases in the environment. Data coming from the array can be ... En savoir plus

Electron Trajectories in Scanning Field-Emission Microscopy

H. Cabrera [1],
[1] Swiss Federal Institute of Technology, Zurich, Switzerland

The Scanning Field Emission Microscopy (SFEM) is a novel technology similar to the better known Scanning Tunneling Microscopy (STM). In STM, electrons are exchanged between the outermost atom of a sharp tip and the outermost atom of a target over sub-nanometer distances by means of the ... En savoir plus

Visualization of Non-Invasive Electrical Impedance Spectroscopy on the Volar Forearm

Betty Tsai [1],
[1] National University of Singapore, Singapore

Mathematical modeling and simulation of electrical fields through the human skin provide important insights into its electrophysiological state. As the human skin is a complex multi-layer entity of different compositions, we have chosen to select representative material properties to ... En savoir plus

Carbon Nanotube Based Mass Sensor Using Atomic Resolution Nanomechanical Resonators

M. Roshini[1], G .B. Priyanga[1], K. C. Devi[1]
[1]PSG College of Technology, Coimbatore, Tamil Nadu, India

The objective of this paper is to design and simulate Carbon Nano-Tube (CNT) based mass sensor that determines extremely low measures of molecules using COMSOL Multiphysics® software. The ultimate goal of this nanomechanical resonator sensor is that it allows detection at single ... En savoir plus

Premier

151–160 of 533

Dernier