Articles techniques et présentations

This paper presents preliminary estimations of CO2 overpressure into the reservoir and CO2 leakage through the caprock and the overburden. A simple, two-phase flow model in porous media based on Darcy’s law was used, in order to explore easily long time periods. The models produced by ... En savoir plus

Introduction Among the advanced oxidation processes (AOPs) for removal of volatile organic compounds (VOCs) from air, photocatalytic oxidation (PCO) is considered a very promising technology [1,2]. PCO can achieve mineralization of harmful VOCs to CO2 and H2O using only UV light [3]. A ... En savoir plus

Standing column wells (SCW) are open-loop geoexchange systems used to provide space heating and cooling to buildings. As they use groundwater as heat carrier fluid and modify its thermo-chemical conditions along the year, they may favor calcite dissolution and precipitation, thus ... En savoir plus

Venovenous extracorporeal life support (VV-ECLS) provides gas exchange support for severe lung failure by using an extracorporeal circuit consisting of a blood pump and an artificial membrane lung. Blood is withdrawn from a cannula placed into the inferior vena cava, and returned from ... En savoir plus

The use of plasmas for the treatment industrial effluents provides a new alternative to the decontamination of wastewater. The strong oxidizing species (O,O3, OH) generated by the plasma, at room temperature, can oxidise organic pollutants present in the water. Our simulation deals with ... En savoir plus

A model was developed to simulate the reaction, concentration field, flow field, and temperature distribution inside a Claus reactor for converting hydrogen sulfide to sulfur. The model considered two ideal reactors, a continuous stirred tank reactor and a plug flow reactor. As expected, ... En savoir plus

The present study deals with a twodimensional modeling and simulation of a thermal swing adsorption (TSA) process used for the capture of CO2 from CO2/N2 mixture. The models are described by partial differential equations (PDEs) including conservation equations, models for equation of ... En savoir plus

The geomechanical effects related to CO2 injection into the Krechba formation at In Salah, Algeria, are considered through a coupled modeling approach to simulate simultaneously CO2 migration in the aquifer and the surrounding formations, as well as the poro-elastic stress changes ... En savoir plus

Electric resistances are widely used as heating elements in domestic and industrial equipment; since process water contains calcium carbonate and calcium bicarbonate, limescale plays an important role on global efficiency of water-heating systems. Calcium carbonate has a very low thermal ... En savoir plus

Examples of Electromagnetic processes are presented: (1) cold crucible, (2) electromagnetic pump, (3) DC electromagnetic brake. A combined approach by using multiphysics modeling with Comsol and experimental validation is used in order to give some guidelines for process improvement and ... En savoir plus