Articles techniques et présentations

Waterflooding and steam-flooding are used worldwide for EOR. Recently, CO2-flooding has attracted global attention as a means of EOR as well as for carbon capture and sequestration. These processes cause significant changes over time in the fluid composition of oil reservoirs. This paper ... En savoir plus

The capture and storage of CO2 in deep geological formations is one of the proposed solutions to reduce CO2 emissions to the atmosphere. CO2 is injected as a supercritical fluid deep below a confining geological formation that prevents its return to the atmosphere. A configuration of ... En savoir plus

Most of mining works, either on the surface or in the underground, demand continuous groundwater pumping in order to operate under dry conditions. When the mining activity stops, dewatering also stops and mining facilities begin to flood, quite quickly at the beginning but becoming ... En savoir plus

In this work, we present a number of scoping calculations that have been carried out to design an in-situ redox experiment (Figure 1) focused on assessing potential changes in the pH and redox conditions and in the buffering capacity of the Olkiluoto bedrock (i.e. the site for the ... En savoir plus

The reactive transport simulation interface COMSOL-PHREEQC, developed by Wissmeier & Barry (2011), provides a MATLAB®-based coupling interface to combine COMSOL Multiphysics® for flow and heat transport simulations and PHREEQC as a geochemical batch reaction simulator. The ... En savoir plus

The effective modeling of enhanced geothermal systems (EGS) requires the coupling of geomechanics, fluid flow and thermal processes. An understanding of the complete system with these coupled processes is vital, not just for reservoir stimulation targeted at enhancing reservoir ... En savoir plus

Significant volumes of the worlds proved reserves are in dolostone reservoirs. Scope for recovery and success/upside of new exploration plays depend on the chances of encountering dolostone reservoirs with good reservoir properties. Although dolostones make excellent reservoirs in ... En savoir plus

In this work, COMSOL Multiphysics was used to develop a model to investigate the degree of saturation in sloped terrain. The model was validated via laboratory experiments incorporating Lan’s man-made rainfall slope model test. The validated model was used in an actual case study to ... En savoir plus

Seawater intrusion into coastal aquifers is usually modeled by using transport models that include account for the effect of variable-density on flow. Variable-density models can be validated with the Henry and Elder benchmark problems. However, when mixed convective flow is simulated ... En savoir plus

We use GPS measurements and Finite Element analysis to investigate strain accumulation in the interaction between active fronts of the Southern Alps and Dinarides at the northern edge of the Adriatic micro-plate. We develop a three dimensional model of the area taking into account the ... En savoir plus