Articles techniques et présentations

This work demonstrated the importance and feasibility of experimental image to simulation workflow. The workflow is successfully applied to a food processing study, where multiphysics and multiscale modeling based on 3D experimental image reconstruction contributes to the preservation of ... En savoir plus

The use of microwaves for heating purposes of dielectric materials is encountered in many industrial applications (food processing, chemistry, material engineering and medical applications). In most of these thermal applications, the prediction of the temperature evolution within the ... En savoir plus

As a key component of MEMS, microprocessor with high computing performances is facing with severe thermal challenge due to the increasing power density, miniaturization as well as higher operating temperature requirements, and thermal management in corresponding fields has become one of ... En savoir plus

In the framework of the Austrian FFG project SaLüΗ!, a compact mechanical ventilation system with integrated micro-heat pump was developed. The aim was a high level of prefabrication and a compact design allowing for installation also in small flats, e.g. into the façade. Due to the ... En savoir plus

The subsurface thermal structure in presence of groundwater recharge/discharge has been obtained by applying the Robin type boundary condition at the earth’s surface. The Robin type boundary condition involves the effect air temperatures at the surface which are taken as exponentially ... En savoir plus

The quality of coatings obtained by means of thermal spraying depends strongly on the mechanism of the interaction between the molten droplets and the surface to be covered. The aim of the present study is to simulate the impact of a droplet onto a substrate, in order to have a good ... En savoir plus

Many materials require functionally graded cellular microstructures whose porosity is engineered to meet specific requirements of diverse applications. It has been shown in previous work that the bubble growth rate of a polymeric foam can be influenced by the surrounding acoustic ... En savoir plus

Although we know the physics inside a media where the sound waves propagate, determination of material\'s or structure\'s sound reduction index is not an easy task. The lack of good engineering solutions proves the point. The only reliable way to calculate the sound reduction index is ... En savoir plus

Interest in the production of hydrogen from hydrocarbons has grown significantly recently. In order to achieve high surface to volume ratio with reasonable pressure drop, monolithic reactors are used. The goal of this work is to develop a two-phase (gas & solid) transient catalytic ... En savoir plus

In this contribution we present the results of the numerical modeling and performance optimization study of a diaphragm pump for drug infusion. The main objective is to develop a numerical model that replicates the pumping cycle (400ms) and also provides indications about the variation ... En savoir plus