Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Amsterdam 2025

Optimization of Microstructures Used in CMOS-MEMS Devices Based on a Topological Design Process

J. Mares-Carreño [1], G. S. Abarca-Jiménez [2], M. A. Reyes-Barranca [2],
[1] Escuela Superior de Ingeniería Mecánica y Eléctrica, Instituto Politécnico Nacional, Ciudad de Mexico, D.F., Mexico
[2] Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Ciudad de México, D.F., Mexico

The paper exhibits the process followed to obtain the geometry of a support for a MEMS inertial sensor by means of a topology optimization process. The SIMP method is used for the optimization process in which the objective is to obtain a support structure with a minimum rigidity ... En savoir plus

Thermo-mechanical Modeling of Pu-238 Production Target at HFIR

C.J. Hurt [1], J.D. Freels [2],
[1] University of Tennessee, Knoxville, TN, USA
[2] Oak Ridge National Laboratory, Oak Ridge, TN, USA

The production model in the COMSOL Multiphysics® software makes use of the most up-to-date PIE data, material property inputs, and modeling methodology. The fully coupled thermo-mechanical equations are solved over the entire domain, significantly increasing the degrees of freedom ... En savoir plus

Glass Transition of ABS in 3D Printing

M. Rahman [1], N. R. Schott [2], L. K. Sadhu [3],
[1] North South University, Dhaka, Bangladesh
[2] Department of Plastics Engineering, University of Massachusetts - Lowell, Lowell, MA, USA
[3] IRays Teknology Ltd., Dhaka, Bangladesh

In a commercial 3D printer head, plastic ribbon passes through a hot nozzle of an extruder to dispense liquid plastic droplets to construct the model. In this paper a 2D axisymmetric model of a 3D head is considered to study the secondary transition change from below the glass ... En savoir plus

Simulation and Testing of a Tunable Organ Pipe for Ocean Acoustic Tomography

A. K. Morozov [1],
[1] Teledyne Technologies Inc., Falmouth, MA, USA

Teledyne Marine developed a system for the long-range ocean acoustic tomography, which uses a tunable, high-efficiency sound resonator. The high-Q resonator tunes to match the frequency and phase of a reference frequency-modulated signal. The analysis of a high-Q resonant organ pipe with ... En savoir plus

A Virtual Laboratory for the 4 Bed Molecular Sieve of the Carbon Dioxide Removal Assembly

R. Coker [1], J. Knox [1], B. O'Connor [1],
[1] Marshall Space Flight Center - NASA, Huntsville, AL, USA

Introduction: Ongoing work to improve water and carbon dioxide separation systems to be used on crewed space vehicles combines sub-scale systems testing and multi-physics simulations. Thus, as part of NASA’s Advanced Exploration Systems (AES) program and the Life Support Systems ... En savoir plus

Finite Element Modeling of MEMS Chevron Thermal Actuators for Strain Engineering of Graphene

M. Vutukuru [1], J. Christopher [2], B. Goldberg [1,2], D. Bishop [1,2,3], A. Swan [1,2,3]
[1] Department of Electrical and Computer Engineering, Boston University, Boston, MA, USA
[2] Department of Physics, Boston University, Boston, MA, USA
[3] Division of Material Science Engineering, Boston University, Boston, MA, USA

Graphene, a single layer of carbon atoms, has demonstrated extremely high electric and thermal conductivities, tensile strength, and is therefore an exciting novel building block in the world of 2D flexible electronics. We propose the integration of graphene with MEMS devices to ... En savoir plus

Maximizing the Fatigue Crack Response in Surface Eddy Current Inspections of Aircraft Structures

C. Mandache [1], T. Theodoulidis [2],
[1] National Research Council Canada, Ottawa, ON, Canada
[2] University of Western Macedonia, Kozani, Western Macedonia, Greece

In-service detection of fatigue cracking in metallic aerospace structures relies on capable and efficient eddy current inspection procedures. For best results, inspections with surface scanning eddy current techniques are following rigorous procedures that indicate the instrument ... En savoir plus

Modeling the Acoustic Scattering from Objects Buried in Porous Sediment Using COMSOL Multiphysics® Software

A. Bonomo [1], M. Isakson [1],
[1] Applied Research Laboratories, The University of Texas at Austin, Austin, TX, USA

A frequency-domain finite element (FE) technique for computing the acoustic scattering from axially symmetric fluid-loaded structures subject to a nonsymmetric forcing field based on Ref. 1 is extended to poroelastic media and implemented in COMSOL Multiphysics® software. This method ... En savoir plus

Theoretical and Experimental Validation of Micro Hot Embossing on Polymeric Substrates

F. Lai [1], N. K. Shivaprakash [1], J. Zhang [1], A. Panwar [1], J. Mead [1], C. Barry [1], Q. Truong [2],
[1] University of Massachusetts Lowell, Lowell, MA, USA
[2] US Army Natick Soldier Research, Development and Engineering Center, Natick, MA, USA

Micro hot embossing on a large area polymeric substrates using roll-to-roll (R2R) mode has been considered as one of the most promising technologies that can offer continuous fabrication of large area polymeric substrates. Besides continuous operation, roll-to-roll (R2R) process offers ... En savoir plus

A COMSOL Multiphysics® Software Analysis of Beam Tube Cooling in the High Flux Isotope Reactor of ORNL

J. D. Freels [1],
[1] Research Reactors Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA

Previous to the present work, a formal calculation was approved [1,2] to support the operation of the High Flux Isotope Reactor (HFIR) Horizontal Beam-Tube 1 of 4 (HB-1). The present calculation [3,4] repeats the previous work using COMSOL Multiphysics® software and extends the analysis ... En savoir plus

Premier

2331–2340 of 6150

Dernier